Am 06/10/2011 23:28, schrieb Wolfgang Denk: > Dear Stefano Babic, > > In message <1316527939-7212-1-git-send-email-sba...@denx.de> you wrote: >> The flea3 board is a custom board by CarMediaLab used >> in automotive. >> Network (FEC), NOR, NAND and SPI are supported. >> >> Signed-off-by: Stefano Babic <sba...@denx.de> >> --- >> >> Changes since V2: >> - put the board into manufacturer's directory (CarMediaLab) >> >> Changes since V1: >> - add missing entry in MAINTAINERS (F. Estevam) >> >> MAINTAINERS | 1 + >> board/CarMediaLab/flea3/Makefile | 49 ++++++ >> board/CarMediaLab/flea3/flea3.c | 254 ++++++++++++++++++++++++++++ >> board/CarMediaLab/flea3/lowlevel_init.S | 79 +++++++++ >> boards.cfg | 1 + >> include/configs/flea3.h | 280 >> +++++++++++++++++++++++++++++++ >> 6 files changed, 664 insertions(+), 0 deletions(-) >> create mode 100644 board/CarMediaLab/flea3/Makefile >> create mode 100644 board/CarMediaLab/flea3/flea3.c >> create mode 100644 board/CarMediaLab/flea3/lowlevel_init.S >> create mode 100644 include/configs/flea3.h > > Checkpatch says: > > total: 0 errors, 1 warnings, 676 lines checked >
Thanks, it seems I forget to rerun checkpatch again - I fix it. Best regards, Stefanio Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
