Dear Stefano Babic, In message <1316527939-7212-1-git-send-email-sba...@denx.de> you wrote: > The flea3 board is a custom board by CarMediaLab used > in automotive. > Network (FEC), NOR, NAND and SPI are supported. > > Signed-off-by: Stefano Babic <sba...@denx.de> > --- > > Changes since V2: > - put the board into manufacturer's directory (CarMediaLab) > > Changes since V1: > - add missing entry in MAINTAINERS (F. Estevam) > > MAINTAINERS | 1 + > board/CarMediaLab/flea3/Makefile | 49 ++++++ > board/CarMediaLab/flea3/flea3.c | 254 ++++++++++++++++++++++++++++ > board/CarMediaLab/flea3/lowlevel_init.S | 79 +++++++++ > boards.cfg | 1 + > include/configs/flea3.h | 280 > +++++++++++++++++++++++++++++++ > 6 files changed, 664 insertions(+), 0 deletions(-) > create mode 100644 board/CarMediaLab/flea3/Makefile > create mode 100644 board/CarMediaLab/flea3/flea3.c > create mode 100644 board/CarMediaLab/flea3/lowlevel_init.S > create mode 100644 include/configs/flea3.h
Checkpatch says: total: 0 errors, 1 warnings, 676 lines checked Please clean up and resubmit. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Hegel was right when he said that we learn from history that man can never learn anything from history. - George Bernard Shaw _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
