On 30/09/11 12:39, nagabhushana.netagu...@ti.com wrote:
> From: Nagabhushana Netagunte <nagabhushana.netagu...@ti.com>
>
> da830 boards have mac address stored in I2C EEPROM. This patch
> adds support to restore mac address from EEPROM if environment variable
> 'ethaddr' is not set.
>
> Signed-off-by: Sudhakar Rajashekhara <sudhakar....@ti.com>
> Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagu...@ti.com>
> ---
>  board/davinci/da8xxevm/da830evm.c |   20 ++++++++++++++++++++
>  include/configs/da830evm.h        |    1 +
>  2 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/board/davinci/da8xxevm/da830evm.c 
> b/board/davinci/da8xxevm/da830evm.c
> index 0650653..69ed293 100644
> --- a/board/davinci/da8xxevm/da830evm.c
> +++ b/board/davinci/da8xxevm/da830evm.c
> @@ -188,6 +188,26 @@ int board_init(void)
>  
>  #define PHY_SW_I2C_ADDR      0x5f /* Address of PHY on i2c bus */
>  
> +int misc_init_r(void)
> +{
> +     uint8_t eeprom_enetaddr[6];
> +     uint8_t val[2];
> +
> +     if (!eth_getenv_enetaddr("ethaddr", eeprom_enetaddr)) {
> +             /* Read Ethernet MAC address from EEPROM if available. */
> +             if (dvevm_read_mac_address(eeprom_enetaddr))
> +                     /* Set Ethernet MAC address from EEPROM */
> +                     davinci_sync_env_enetaddr(eeprom_enetaddr);
> +     }
> +
> +     val[0] = 0x01;
> +     val[1] = 0x23;
> +
> +     if (i2c_write(PHY_SW_I2C_ADDR, 0, 0, val, 2))
> +             printf("Ethernet switch start failed!\n");
> +
> +}
> +

There is already code to do this, in the same file, in board_eth_init(). Why 
the new code?

Nick.

>  /*
>   * Initializes on-board ethernet controllers.
>   */
> diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
> index 66fdea2..a451513 100644
> --- a/include/configs/da830evm.h
> +++ b/include/configs/da830evm.h
> @@ -160,6 +160,7 @@
>  /*
>   * U-Boot general configuration
>   */
> +#define CONFIG_MISC_INIT_R
>  #undef CONFIG_USE_IRQ                        /* No IRQ/FIQ in U-Boot */
>  #undef CONFIG_MISC_INIT_R
>  #undef CONFIG_BOOTDELAY

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to