On Fri, Sep 30, 2011 at 12:32 PM, Kooi, Koen <k-k...@ti.com> wrote: > On Fri, Sep 30, 2011 at 21:29:11, Steve Sakoman wrote: >> Subject: [PATCH] omap: beagle: Use ubifs instead of jffs2 for >> nand boot >> >> Signed-off-by: Steve Sakoman <st...@sakoman.com> >> --- >> >> diff --git a/include/configs/omap3_beagle.h >> b/include/configs/omap3_beagle.h >> index 2c0f5a5..a92ffdf 100644 >> --- a/include/configs/omap3_beagle.h >> +++ b/include/configs/omap3_beagle.h >> @@ -227,8 +227,8 @@ >> "mmcdev=0\0" \ >> "mmcroot=/dev/mmcblk0p2 rw\0" \ >> "mmcrootfstype=ext3 rootwait\0" \ >> - "nandroot=/dev/mtdblock4 rw\0" \ >> - "nandrootfstype=jffs2\0" \ >> + "nandroot=ubi0:rootfs ubi.mtd=4\0" \ >> + "nandrootfstype=ubifs\0" \ > > IIRC all beagle builds use 'beagleboard-rootfs' as ubi name, but I need to > double check. > > In any case, this is already a massive improvement, so: > > Acked-by: Koen Kooi <k-k...@ti.com>
I do generic omap kernel & rootfs builds, so it seemed better to do a non machine specific ubi name. Steve _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
