This commit changes MX31 prefix in common USB_CTRL bits to MXC.
Signed-off-by: Jana Rapava <ferma...@gmail.com>
Cc: Marek Vasut <marek.va...@gmail.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Remy Bohmer <li...@bohmer.net>
---
Changes for v2:
- changed to proper patch
Changes for v3:
- merged other USB patches from u-boot-pxa/efikasb
- offset-based access changed to struct-based access
- use {clrset,clr,set}bits_le32() calls
- CodingStyle and naming cleanup
Changes for v4:
- split into patchset
drivers/usb/host/ehci-mxc.c | 9 +++------
1 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index a0cfbb7..973bb4f 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -37,9 +37,6 @@
#endif
#ifdef CONFIG_MX31
-#define MX31_OTG_SIC_SHIFT 29
-#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
@@ -66,11 +63,11 @@ static int mxc_set_usbcontrol(int port, unsigned int flags)
switch (port) {
case 0: /* OTG port */
- v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+ v &= ~(MXC_OTG_SIC_MASK | MXC_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
- << MX31_OTG_SIC_SHIFT;
+ << MXC_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_OTG_PM_BIT;
+ v |= MXC_OTG_PM_BIT;
break;
case 1: /* H1 port */
--
1.7.6.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
