hello: I need your advise. I port the u-boot-1.3.3 to my PXA270 board。Every thing works well but the SMC91111 dirver.I have aready config the config file like this: #define CONFIG_DRIVER_SMC91111 1 #define CONFIG_SMC91111_BASE 0x10000300 #define CONFIG_SMC91111_EXT_PHY
#define CONFIG_SMC_USE_32_BIT 1 Then I use PING command to my host and the minicom shows the host is not alive.But I am sure the host is right because I had PING the host ,which is in VMware. And after I turn on the DEBUG of SMC91111.c to 5 ,I get the message.Here are part of them. SMC91111: smc_hardware_send_packet SMC91111: memory allocation, try 1 failed ... SMC91111: memory allocation, try 2 failed ... SMC91111: memory allocation, try 3 failed ... SMC91111: memory allocation, try 4 failed ... SMC91111: memory allocation, try 5 failed ... So how can I fix this problem?Can you give me some suggestions? ps:my u-boot run in RAM and boot from BLOB.Then the u-boot.bin skip the lowlevel_init function. Thank you !
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
