> > Hi Sandeep, > > Le 08/09/2011 17:16, s-paul...@ti.com a écrit : > > Albert, > > > > Please pull u-boot-ti/master. > > I checked all the patches for checkpatch errors and fixed > > all the warnings that i could. Some cannot be fixed. > > Sanjeev's patches update thr GPIO for OMAP. The GPIO on OMAP > > was causing issues which now seem to be fixed. > > > > Regards, > > Sandeep > > > > The following changes since commit > 63cf97e825b8d821e2d3d6d6c6604634ac24810a: > > Sanjeev Premi (1): > > omap3: beagle: Fix build warning > > > > are available in the git repository at: > > > > git://git.denx.de/u-boot-ti.git master > > > > Aneesh V (4): > > omap4: factor out common part from board config headers > > omap4: make SDRAM init work for ES1.0 silicon > > omap4: IO settings > > omap4: fix pad configuration settings for SDP and Panda > > > > Howard D. Gray (1): > > ARMV7: OMAP3: Add 37xx ESx revision numbers. > > > > Jason Kridner (1): > > led: remove camel casing of led identifiers globally > > > > Joel A Fernandes (1): > > OMAP: Add function to get state of a GPIO output > > > > Michael Jones (2): > > ARMV7: OMAP: Write more than 1 byte at a time in i2c_write > > ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible > > > > Nagabhushana Netagunte (3): > > da830: modify the U-Boot prompt string > > da830: enable SPI flash boot mode > > da830: modify the MEMTEST start and end address > > > > Sandeep Paulraj (1): > > OMAP3 Beagle: Minor config cleanup > > > > Sanjeev Premi (3): > > omap: gpio: Use generic API > > omap: gpio: generic changes after changing API > > omap: gpio: Adapt board files to use generic API > > > > Rebasing and applying locally right now. What are these warnings that > cannot be eliminated?
u-boot does not have linux/gpio.h checkpatch complains about this. Regards, Sandeep _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
