Dear Albert ARIBAUD, In message <4e634765.3050...@aribaud.net> you wrote: > Hi (again and again) Wolfgang, > > Here the ARM pull request with author name fixed for Aneesh V. > > The following changes since commit a1118d60423c1fe25afc9df9015f72739f96fd67: > > MPC8xx: fix build problem for ETX094 board (2011-08-31 22:38:20 +0200) > > are available in the git repository at: > git://git.denx.de/u-boot-arm.git master > > Aneesh V (7): > omap: fix gpio related build breaks > omap4: fix build warning due to signed unsigned comparison > omap4: increase SRAM budget to fix build error > arm: do not force d-cache enable on all boards > omap: enable caches at system start-up > armv7: stronger barrier for cache-maintenance operations > armv7: cache: remove flush on un-aligned invalidate > > Anton Staaf (1): > mmc: S5P: Support DMA restarts at buffer boundaries > > Asen Dimov (3): > pm9261: compiles with the AT91 reworked scheme > make pm9263 buildable for v2011.06 release > make pm9g45 buildable for v2011.06 release > > Bob Feretich (1): > OMAP3 Beagle Pin Mux initialization glitch fix > > Chander Kashyap (5): > SMDKV310: Fix build error for smdkv310 board > SMDKV310: Fix undefined reference error > SMDKV310: MMC SPL: Remove unwanted dummy functions > ARMV7: Add support for Samsung ORIGEN board > ORIGEN: Add MMC SPL support > > Christian Spielberger (1): > beagleboard: enable HUB power on all variants of the BeagleBoard > > David Jander (1): > ARM: MX51: PLL errata workaround > > Dirk Behme (3): > MAKEALL ARMv7: Use boards.cfg > SMDKV310: Fix host compilation of mkv310_image > mkimage: Fix 'Unknown OMAP image type - 5' > > Eric Benard (1): > dm3730: enable dpll5 > > Fabio Estevam (1): > mx53: ddr3: Update DD3 initialization > > Heiko Schocher (1): > arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize > > Igor Grinberg (3): > arm: nvidia and smdk6400: use common code for machine type > arm: omap: innovator: use common code for machine type > arm: fix bd pointer dereference prior initialization > > Jason Kridner (12): > USB: Remove __attribute__ ((packed)) for struct ehci_hccr and > ehci_hcor > BeagleBoard: Added userbutton command > BeagleBoard: Configure DVI/S-video > BeagleBoard: config: make mtest run > BeagleBoard: config: increase command-line functionality > BeagleBoard: config: add optargs/buddy/camera > BeagleBoard: config: Enabled multibus support for I2C in > configuration > BeagleBoard: config: updated default configuration > Corrected LED name match finding avoiding extraneous Usage printouts > BeagleBoard: fix LED 0/1 in driver > led: added cmd_led to Makefile > led: correct off/on locations in structure > > Jason Liu (1): > mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF > > Joel A Fernandes (4): > BeagleBoard: config: hardcode MAC for onboard SMSC > BeagleBoard: config: use uImage.beagle for tftp > led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all' > led: Remove state-saving of led for toggle functionality and add > toggle option to led command > > Joel Fernandes (1): > ehci-hcd: Allow cleanups to happen gracefully on a timeout. > > Koen Kooi (8): > beagle: pass expansionboard name in bootargs > beagleboard: add support for xM revision C > BeagleBoard: turn off clocks in ehci_stop > BeagleBoard: config: load kernel from MMC ext, not FAT > BeagleBoard: config: decrease bootdelay to 2 seconds > BeagleBoard: config: enable networking > BeagleBoard: config: enable asix driver and dhcp > BeagleBoard: config: enable DSS > > Linus Walleij (7): > integratorap: make the compile work again > integratorap: support relocation > integratorap: support the hush shell > integratorap: support some rudimentary commands > integratorap: remove hardcoded 32MB memory cmdline > integratorcp: make the board compile > integrator: convert to new build system > > Manjunathappa, Prakash (1): > da850: add support for Spectrum Digital AM18xx EVM > > Marek Vasut (3): > PXA: Fix Lubbock, remove redundant parenthesis > PXA: Fix CSB226, fix monitor length > PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE > > Matthias Fuchs (1): > at91: reworked support for meesc board > > Matthias Weisser (1): > arm: lib: memcpy: Do not copy to same address > > Nagabhushana Netagunte (8): > dm6446: disable cache usage due to coherency issues > dm365: disable cache usage due to coherency issues > da850: indicate cache usage disable in config file > da850: add NOR boot mode support > da850: modify the U-Boot prompt string > da850: add support to wake up DSP during board init > da850: fix the channel number for EMAC teardown init > da850: modifications for Logic PD Rev.3 AM18xx EVM > > Rajashekhara, Sudhakar (1): > dm365: modify boot prompt from dm365 to dm36x > > Reinhard Meyer (1): > AT91: fix at91sam9g45.h to include USB Host defines > > Simon Glass (4): > Tegra2: Add microsecond timer function > Tegra2: Add more clock support > Tegra2: Add additional pin multiplexing features > Tegra2: Use clock and pinmux functions to simplify code > > Stefano Babic (23): > MX31: removed warnings due to clock.h > ARM: versatilepb : drop warnings due to double definitions > MX35: MX35PDK: support additional RAM on CSD1 > MX: MX35 / MX5: uniform clock command with powerpc > IMX: uniform GPIO interface using GPIO framework > MX25: make use of GPIO framework for MX25 processor > MX31: make use of GPIO framework for MX31 processor > MX5: make use of GPIO framework for MX5 processor > MX35: make use of GPIO framework for MX35 processor > MX31: QONG: make use of GPIO framework > MX5: efikamx: make use of GPIO framework > MX25: zmx25: make use of GPIO framework > MX5: mx53ard: make use of GPIO framework > MX5: mx53smd: make use of GPIO framework > MX5: vision2: make use of GPIO framework > MX5: mx53evk: make use of GPIO framework > MX5: mx53loco: make use of GPIO framework > MX35: mx35pdk: make use of GPIO framework > MX5: mx51evk: make use of GPIO framework > MX31: mx31ads: make use of GPIO framework > MX31: imx31_litekit: make use of GPIO framework > IMX: scb9328: drop warnings > ARM: versatile: drop warnings > > Steve Sakoman (1): > OMAP: Remove omapfb.debug=y from Beagle and Overo env settings > > Sudhakar Rajashekhara (1): > da8xx: add support for multiple PLL controllers > > Syed Mohammed Khasim (1): > OMAP3: Add DSS driver for OMAP3 > > Thomas Petazzoni (4): > sbc35_a9g20: update board to the new AT91 organization > tny_a9260/tny_a9g20: update board to the new AT91 organization > atmel: update at91sam9m10g45 SoC support to new style > atmel: Update support of board AT91SAM9M10G45-EK to new style > > Tom Rini (9): > OMAP3: CM-T35: Use generic MMC driver > OMAP3: DIG297: Use generic MMC driver > OMAP3: Zoom1: Use generic MMC driver > OMAP3: Zoom2: Use generic MMC driver > OMAP3: pandora: Use generic MMC driver > AM3517 CraneBoard: Use generic MMC driver > TI OMAP3 SDP3430: Use generic MMC driver > devkit8000: Use generic MMC driver > OMAP3: Remove legacy mmc driver > > Vaibhav Hiremath (5): > OMAP3/4: Increase console I/O buffer size > omap3:clock: configure GFX clock to 200MHz for AM/DM37x > omap3:clock: check cpu_family before enabling clks for IVA & CAM > omap3evm: Use generic MMC driver > am3517evm: Use generic MMC driver > > Wolfgang Denk (16): > ARM: remove broken "assabet" board > ARM: remove broken "armadillo" board > ARM: remove broken "B2" board > ARM: remove broken "edb93xx" boards > ARM: remove broken "lpd7a40x" boards > ARM: remove broken "mx1fs2" board > ARM: remove broken "netstar" board > ARM: remove broken "sbc2410x" board > ARM: remove broken "smdk2400" board > ARM: remove broken "voiceblue" board > ARM: remove broken "at91cap9adk" board > ARM: remove broken "cmc_pu2" board > ARM: remove broken "csb637" board > ARM: remove broken "kb9202" board > ARM: remove broken "m501sk" board > ARM: remove broken "at91rm9200dk" board > > Lukasz Majewski (4): > gpio:samsung s5p_ suffix add for GPIO functions > gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal) > i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c) > i2c:gpio:s5p: Enable I2C GPIO on the GONI target
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de An armed society is a polite society. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot