On Aug 1, 2011, at 1:23 AM, Kumar Gala wrote: > From: Mingkai Hu <mingkai...@freescale.com> > > Add support for RGMII, SGMII and XAUI Ethernet on P2041RDB board. > > The five dTSEC can be routed to two on-board RGMII phy, three on-board > SGMII phy or four SGMII phy on SGMII riser card according to different > serdes protocol configuration and board lane configuration. Also updated > the device tree to direct the Fmac MAC to the correct PHY. > > Removed CONFIG_SYS_FMAN_FW as its not used anywhere. > > Signed-off-by: Mingkai Hu <mingkai...@freescale.com> > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> > --- > board/freescale/p2041rdb/Makefile | 1 + > board/freescale/p2041rdb/eth.c | 225 +++++++++++++++++++++++++++++++++++ > board/freescale/p2041rdb/p2041rdb.c | 4 + > include/configs/P2041RDB.h | 6 +- > 4 files changed, 235 insertions(+), 1 deletions(-) > create mode 100644 board/freescale/p2041rdb/eth.c
applied to 85xx next - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
