Tom Rini wrote:
> Switch from the legacy omap3 mmc driver to the new generic omap hsmmc
> driver. This patch is based on the work done for Beagle, etc.
>
> Signed-off-by: Tom Rini<tr...@ti.com>
Again, please Cc: the board maintainers in the future, thanks.
> ---
> board/comelit/dig297/dig297.c | 9 +++++++++
> include/configs/dig297.h | 5 +++--
> 2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
> index 0062f12..a7071cd 100644
> --- a/board/comelit/dig297/dig297.c
> +++ b/board/comelit/dig297/dig297.c
> @@ -37,6 +37,7 @@
> #include<netdev.h>
> #include<twl4030.h>
> #include<asm/io.h>
> +#include<asm/arch/mmc_host_def.h>
> #include<asm/arch/omap3-regs.h>
> #include<asm/arch/mux.h>
> #include<asm/arch/mem.h>
> @@ -145,6 +146,14 @@ void set_muxconf_regs(void)
> MUX_DIG297();
> }
>
> +#ifdef CONFIG_GENERIC_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + omap_mmc_init(0);
> + return 0;
> +}
> +#endif
> +
> #ifdef CONFIG_CMD_NET
> /*
> * Routine: setup_net_chip
> diff --git a/include/configs/dig297.h b/include/configs/dig297.h
> index b68f073..0e05df3 100644
> --- a/include/configs/dig297.h
> +++ b/include/configs/dig297.h
> @@ -97,8 +97,9 @@
> #define CONFIG_BAUDRATE 115200
> #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
> 115200}
> -#define CONFIG_MMC
> -#define CONFIG_OMAP3_MMC
> +#define CONFIG_GENERIC_MMC 1
> +#define CONFIG_MMC 1
> +#define CONFIG_OMAP_HSMMC 1
IIRC the coding style says you should define the y/n constants without
a value, e.g.:
#define CONFIG_GENERIC_MMC
not:
#define CONFIG_GENERIC_MMC 1
Apart for this:
Tested-by: Luca Ceresoli <luca.ceres...@comelit.it>
Luca
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
