Switch from the legacy omap3 mmc driver to the new generic omap hsmmc
driver. This patch is based on the work done for Beagle, etc.
Signed-off-by: Tom Rini <tr...@ti.com>
---
board/comelit/dig297/dig297.c | 9 +++++++++
include/configs/dig297.h | 5 +++--
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
index 0062f12..a7071cd 100644
--- a/board/comelit/dig297/dig297.c
+++ b/board/comelit/dig297/dig297.c
@@ -37,6 +37,7 @@
#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/omap3-regs.h>
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
@@ -145,6 +146,14 @@ void set_muxconf_regs(void)
MUX_DIG297();
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
#ifdef CONFIG_CMD_NET
/*
* Routine: setup_net_chip
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index b68f073..0e05df3 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -97,8 +97,9 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
-#define CONFIG_MMC
-#define CONFIG_OMAP3_MMC
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION
/* DDR - I use Micron DDR */
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
