Hi Aneesh,
On 08/05/2011 09:41 AM, Aneesh V wrote:
> Hi Simon,
>
> On Tuesday 02 August 2011 09:29 PM, Simon Schwarz wrote:
>> Implements the saving of boot params passed by OMAP3 ROM code.
>>
>> Signed-off-by: Simon Schwarz<simonschwarz...@gmail.com>
>> ---
>> Didn't exist before V8
>> ---
>> arch/arm/cpu/armv7/omap-common/spl.c | 6 +++++-
>> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 9 +++++++--
>> arch/arm/include/asm/omap_common.h | 10 ++++++++++
>> 3 files changed, 22 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/omap-common/spl.c
>> b/arch/arm/cpu/armv7/omap-common/spl.c
>> index 53d10bf..3dd8e0d 100644
>> --- a/arch/arm/cpu/armv7/omap-common/spl.c
>> +++ b/arch/arm/cpu/armv7/omap-common/spl.c
>> @@ -194,8 +194,12 @@ static void mmc_load_image(void)
>> printf("spl: mmc init failed: err - %d\n", err);
>> hang();
>> }
>> -
>> +/* For OMAP3 there is no automatic boot mode detection */
>> +#ifdef CONFIG_OMAP34XX
>> + boot_mode = CONFIG_SYS_MMC_SD_BOOTMODE;
>> +#else
>> boot_mode = omap_boot_mode();
>> +#endif
>
> Why boot mode detection is not supported? You seem to be saving
> bootparams below that has boot mode information. Why don't you use it?
>
Because you wrote: "What I have done for OMAP4 will not work for OMAP3.
For OMAP3 you will
get only the boot-device(eMMC, MMC/SD, nand etc) and *not* the bootmode(raw
vs FAT)."
http://mid.gmane.org/4e256783.5080...@ti.com
Did I understand you wrong here?
> best regards,
> Aneesh
Regards
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
