Dear Simon, Am 25.07.2011 um 20:05 schrieb Simon Schwarz:
> Support for the new spl structure. Using the interface defined by Aneesh V for > OMAP4 > --- > V1 changes: > ADD support for early console output in SPL > > V2 changes: > ADD include omap_common.h in board.c > ADD implement new omap common interface omap_boot_device, omap_boot_mode and > omap_rev_string (very basic) > CHG cosmetic > CHG Don't add ecc switch command in SPL > ADD save_boot_params stump with warning to implement it > > Transition from V1 to V2 also includes that this patch is now based on > - the new SPL layout by Aneesh V and Daniel Schwierzeck > - the OMAP4 SPL patches by Aneesh V > > This is in some parts a anccesstor of "[U-Boot,2/5] devkit8000 nand_spl: omap3 > support nand_spl boot" > (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102114) in V1 > > Signed-off-by: Simon Schwarz <simonschwarz...@gmail.com> > --- > arch/arm/cpu/armv7/omap3/board.c | 36 +++++++++++++++++++++++++- > arch/arm/cpu/armv7/omap3/lowlevel_init.S | 5 +++ > arch/arm/include/asm/arch-omap3/sys_proto.h | 1 + > arch/arm/include/asm/omap_common.h | 3 +- > 4 files changed, 41 insertions(+), 4 deletions(-) <snip> > --- a/arch/arm/include/asm/omap_common.h > +++ b/arch/arm/include/asm/omap_common.h > @@ -49,8 +49,7 @@ void preloader_console_init(void); > #define MMCSD_MODE_UNDEFINED 0 > #define MMCSD_MODE_RAW 1 > #define MMCSD_MODE_FAT 2 > -#define NAND_MODE_HW 3 > -#define NAND_MODE_SW 4 > +#define NAND_MODE_HW_ECC 3 Well ... just choose this naming in Patch 2/5 ... and also change NAND_MODE_SW > u32 omap_boot_device(void); > u32 omap_boot_mode(void); > -- > 1.7.4.1 regards Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot