Don, Please ask u-boot questions on the u-boot mailing list.
On 22/07/11 01:03, Don McCune wrote: > > We are bringing up a board based on the OMAPL137 processor. The board is > similar to the Spectrum Digital Evm board; however it has used UART2 for > something else, so we need to make UAR1 the console line for u-boot. Could > you tell us how to modify u-boot to use UART1 for its console? > $ grep UART include/configs/da830evm.h #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ Just change DAVINCI_UART2_BASE to DAVINCI_UART1_BASE. (and make sure your boot loader enables the pinmux for UART1) > > > Please reply-to-all with any questions or answers. If you wish to contact us > directly, please call Tim Orling at 805 269 0767. > > > > Thank you. > > > > Regards, > > Don McCune > > Nick.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
