I am trying to activate a PCIe link between two MPC8544 processor's on a
custom board.
One processor is configured as Root Complex(cfg_host_agt[0:2] = '111') and
the other processor as endpoint (cfg_host_agt[0:2] = '101').
Only PCIe1 is active in both processors (cfg_IO_ports[0:2] = '010')
In u-boot I set the following flags in both processors:
#define CONFIG_PCI
#undef CONFIG_PCI1
#define CONFIG_PCIE1
#undef CONFIG_PCIE2
#undef CONFIG_PCIE3
#define CONFIG_FSL_PCI_INIT
#define CONFIG_FSL_PCIE_RESET
In the first processor (configured as RC) I get the following output(u-boot
1.3.0-rc3):
"
pci_init_board: devdisr=7000008, io_sel=2, host_agent=7
PCIE1 connected to Slot2 as Root Complex (base address e000a000)
...PCIE LTSSM=0x16, Negotiated link width=1
Scanning PCI bus 01
PCIE1 on bus 00 - 01
...
"
the link is well negotiated but if i do "pci" in u-boot console it only
shows one device:
"
=> pci
Scanning PCI devices on bus 0
BusDevFun VendorId DeviceId Device Class Sub-Class
_____________________________________________________________
00.00.00 0x1957 0x0033 Processor 0x20
"
In the second processor (configured as EP) I get the following output:
"
...
pci_init_board: devdisr=7000008, io_sel=2, host_agent=5
PCIE1 connected to Slot2 as End Point (base address e000a000)
Scanning PCI bus 00
PCI Scan: Found Bus 0, Device 1, Function 0
00 01 1957 0033 0b20 00
...
"
Here i am using an old version of u-boot (1.3.0-rc3). It seems more
straightforward to work. I've considered updating to the latest u-boot but
since we had serious problems with DDR configuration and this has changed
considerably since the version I am using I am a little reluctant into an
update.
Someone give me a clue?
thanks a lot.
Daniel
--
View this message in context:
http://old.nabble.com/Problem-with-PCI-Express-connecting-2-MPC8544-tp32092567p32092567.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
