Hi Wolfgang, On 15/07/11 05:50, Wolfgang Denk wrote: > Dear Albert ARIBAUD, > > In message <4e1f2100.2030...@aribaud.net> you wrote: >> >> Patch applies on u-boot-arm/master except for 4 files which are not found: >> >> board/ixdp425/flash.c, removed by commit >> 973af335e61eede3578371330abd3971805887f5, "update/fix IXDP425 / IXDPG425 >> boards" >> >> board/mpl/vcma9/flash.c: removed by commit >> 6d754843ff62312999a265162c67588913cab991, "VCMA9: use CFI driver (and >> remove the old one)" >> >> board/trab/cmd_trab.c and board/trab/flash.c: removed by commit >> 566e5cf451ae7e33e31bb62ae5b9b258e33f8609, "ARM: drop unsupported 'trab' >> board" >> >> If this is fine with everyone, I can pull this patch in >> u-boot-arm/master despite the four errors. > > Please do. These files were all correctly removed recently.
I'm OK with this, but I'm about to rebase - After that, I will rename the series, truncate it to only include the ack'd patches, rev them to V2, set their respective in-reply-to to the WIP patches and set the remainder to RFC in patchwork So I could either: - Send a revised version as a separate patch for ARM and remove it from the series - Include it in the truncated series - Remove it from the series and let Albert process it as is Which do you prefer? Regards, Graeme _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
