The pinctrl settings are now upstream, with the upstream voltage supplies, and the HS200 mode is confirmed to work fine but the HS400 mode had reported issues so let's just consume what the upstream DT has now as it's all known good.
Reported-by: Dusty Mabe <[email protected]> Tested-by: Dusty Mabe <[email protected]> Signed-off-by: Peter Robinson <[email protected]> --- arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi index 64c43374c04..7e24be1a5e7 100644 --- a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi +++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi @@ -12,14 +12,6 @@ /delete-property/ vpcie3v3-supply; }; -&sdhci { - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; -}; - &vcc5v0_usb_host { /delete-property/ regulator-always-on; /delete-property/ regulator-boot-on; -- 2.52.0
