> -----Original Message----- > From: Ajay Bhargav [mailto:ajay.bhar...@einfochips.com] > Sent: Friday, July 08, 2011 11:53 AM > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; Ajay Bhargav > Subject: [PATCH 1/4] Armada100: Ethernet support for Marvell gplugD > > This patch adds ethernet support for GuruPlug-Display. tftpboot and > and other network related commands now works. > > Signed-off-by: Ajay Bhargav <ajay.bhar...@einfochips.com> > --- > .gitignore | 1 + > arch/arm/include/asm/arch-armada100/armada100.h | 39 ++ > arch/arm/include/asm/arch-armada100/gpio.h | 81 +++ > arch/arm/include/asm/arch-armada100/mfp.h | 19 + > board/Marvell/gplugd/gplugd.c | 77 +++ > drivers/net/Makefile | 1 + > drivers/net/pxa168_eth.c | 815 > +++++++++++++++++++++++ > drivers/net/pxa168_eth.h | 239 +++++++ > include/configs/gplugd.h | 22 +- > include/netdev.h | 1 +
Spit this patch as 1. gpio: Add GPIO driver for Armada100 2. net: Add Fast Ethernet controller driver for Armada100 3. Armada100: Enable 88E3015 PHY support on GplugD 4. Armada100: Enable Ethernet support on GplugD Also please mentioned the dependency of this code i.e. Gplugd patch which is not yet mainlined. Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
