Add support for FudanMicro FM25S01A SPI NAND. This driver is ported from linux v6.18 and tested on a MT7981 board.
Link: https://lore.kernel.org/linux-mtd/[email protected]/ Signed-off-by: Tianling Shen <[email protected]> --- drivers/mtd/nand/spi/Makefile | 2 +- drivers/mtd/nand/spi/fmsh.c | 76 +++++++++++++++++++++++++++++++++++ 2 files changed, 77 insertions(+), 1 deletion(-) create mode 100644 drivers/mtd/nand/spi/fmsh.c diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile index 152aa1a3783c..a7a0b2cb4b9e 100644 --- a/drivers/mtd/nand/spi/Makefile +++ b/drivers/mtd/nand/spi/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 spinand-objs := core.o otp.o -spinand-objs += alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o +spinand-objs += alliancememory.o ato.o esmt.o fmsh.o foresee.o gigadevice.o macronix.o spinand-objs += micron.o paragon.o skyhigh.o toshiba.o winbond.o xtx.o obj-$(CONFIG_MTD_SPI_NAND) += spinand.o diff --git a/drivers/mtd/nand/spi/fmsh.c b/drivers/mtd/nand/spi/fmsh.c new file mode 100644 index 000000000000..84a567919ebb --- /dev/null +++ b/drivers/mtd/nand/spi/fmsh.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020-2021 Rockchip Electronics Co., Ltd. + * + * Author: Dingqiang Lin <[email protected]> + */ + +#ifndef __UBOOT__ +#include <linux/device.h> +#include <linux/kernel.h> +#endif +#include <linux/mtd/spinand.h> + +#define SPINAND_MFR_FMSH 0xA1 + +static SPINAND_OP_VARIANTS(read_cache_variants, + SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(0, 2, NULL, 0, 0), + SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(0, 1, NULL, 0, 0), + SPINAND_PAGE_READ_FROM_CACHE_1S_2S_2S_OP(0, 1, NULL, 0, 0), + SPINAND_PAGE_READ_FROM_CACHE_1S_1S_2S_OP(0, 1, NULL, 0, 0), + SPINAND_PAGE_READ_FROM_CACHE_FAST_1S_1S_1S_OP(0, 1, NULL, 0, 0), + SPINAND_PAGE_READ_FROM_CACHE_1S_1S_1S_OP(0, 1, NULL, 0, 0)); + +static SPINAND_OP_VARIANTS(write_cache_variants, + SPINAND_PROG_LOAD_1S_1S_4S_OP(true, 0, NULL, 0), + SPINAND_PROG_LOAD_1S_1S_1S_OP(true, 0, NULL, 0)); + +static SPINAND_OP_VARIANTS(update_cache_variants, + SPINAND_PROG_LOAD_1S_1S_4S_OP(false, 0, NULL, 0), + SPINAND_PROG_LOAD_1S_1S_1S_OP(false, 0, NULL, 0)); + +static int fm25s01a_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + return -ERANGE; +} + +static int fm25s01a_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section) + return -ERANGE; + + region->offset = 2; + region->length = 62; + + return 0; +} + +static const struct mtd_ooblayout_ops fm25s01a_ooblayout = { + .ecc = fm25s01a_ooblayout_ecc, + .rfree = fm25s01a_ooblayout_free, +}; + +static const struct spinand_info fmsh_spinand_table[] = { + SPINAND_INFO("FM25S01A", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE4), + NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(1, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&fm25s01a_ooblayout, NULL)), +}; + +static const struct spinand_manufacturer_ops fmsh_spinand_manuf_ops = { +}; + +const struct spinand_manufacturer fmsh_spinand_manufacturer = { + .id = SPINAND_MFR_FMSH, + .name = "Fudan Micro", + .chips = fmsh_spinand_table, + .nchips = ARRAY_SIZE(fmsh_spinand_table), + .ops = &fmsh_spinand_manuf_ops, +}; -- 2.51.1
