On 07/09/2025 16:36, Ferass El Hafidi wrote:
The clock driver is too big for U-Boot SPL at the moment. In the
meantime, continue mmc init even if it is not present.
Signed-off-by: Ferass El Hafidi <fundersc...@postmarketos.org>
---
drivers/mmc/meson_gx_mmc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
index
a4338f1e29c1da07acb0333be9b75a318cba1334..d83a79fa0894fc6a32c40642ebce5f845120efaf
100644
--- a/drivers/mmc/meson_gx_mmc.c
+++ b/drivers/mmc/meson_gx_mmc.c
@@ -332,11 +332,11 @@ static int meson_mmc_probe(struct udevice *dev)
/* Enable the clocks feeding the MMC controller */
ret = clk_get_bulk(dev, &clocks);
- if (ret)
+ if (ret && ret != -ENOSYS)
return ret;
ret = clk_enable_bulk(&clocks);
- if (ret)
+ if (ret && ret != -ENOSYS)
return ret;
cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 |
Can you only not bail out in SPL ? I would like to keep the current behavior on
non-SPL.
Neil
