From: Rob Herring <rob.herr...@calxeda.com> This series enables non-PCI AHCI controllers and adds support for Calxeda Highbank platform which uses the AHCI changes.
Changes from v3: - Added Highbank to MAINTAINERS - Added back patch to fix CONFIG_SKIP_LOWLEVEL_INIT (mistakenly dropped from v2) Wolfgang, Albert, Can you apply these to your trees for v2011.09? All review comments have been addressed. Rob Rob Herring (6): ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7 ARM: Add Calxeda Highbank platform arm: add __ilog2 function scsi/ahci: ata id little endian fix scsi/ahci: add support for non-PCI controllers ARM: highbank: Add AHCI support MAINTAINERS | 4 + arch/arm/cpu/armv7/highbank/Makefile | 46 ++++++++++++ arch/arm/cpu/armv7/highbank/config.mk | 4 + arch/arm/cpu/armv7/highbank/timer.c | 124 +++++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/start.S | 2 + arch/arm/include/asm/bitops.h | 9 +++ board/highbank/Makefile | 49 +++++++++++++ board/highbank/highbank.c | 58 +++++++++++++++ boards.cfg | 1 + common/cmd_scsi.c | 6 +- drivers/block/ahci.c | 72 ++++++++++++++++--- include/ahci.h | 4 + include/configs/highbank.h | 112 +++++++++++++++++++++++++++++ include/scsi.h | 1 + 14 files changed, 480 insertions(+), 12 deletions(-) create mode 100644 arch/arm/cpu/armv7/highbank/Makefile create mode 100644 arch/arm/cpu/armv7/highbank/config.mk create mode 100644 arch/arm/cpu/armv7/highbank/timer.c create mode 100644 board/highbank/Makefile create mode 100644 board/highbank/highbank.c create mode 100644 include/configs/highbank.h -- 1.7.4.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
