The pxecfg commands provide a near subset of the functionality provided by the PXELINUX boot loader. This allows U-boot based systems to be controlled remotely using the same PXE based techniques that many non U-boot based servers use. To avoid identity confusion with PXELINUX, and because not all behavior is identical, we call this feature 'pxecfg'.
As an example, support for the pxecfg commands is enabled for the ca9x4_ct_vxp config. Additional details are available in the README file added as part of this patch series. v2 of this patch series separates the menu code from the pxecfg code, giving a reusable menu implementation. It also contains various smaller changes documented in the comment section of the patches. Jason Hobbs (6): cosmetic, main: correct indentation/spacing issues common: add run_command2 for running simple or hush commands common: make abortboot available for menu use Add generic, reusable menu code Add pxecfg command arm: ca9x4_ct_vxp: enable pxecfg support common/Makefile | 2 + common/cmd_pxecfg.c | 924 ++++++++++++++++++++++++++++++++++++++++ common/hush.c | 2 +- common/main.c | 60 ++-- common/menu.c | 338 +++++++++++++++ doc/README.pxecfg | 238 +++++++++++ include/common.h | 7 + include/configs/ca9x4_ct_vxp.h | 5 + include/hush.h | 2 +- include/menu.h | 40 ++ 10 files changed, 1584 insertions(+), 34 deletions(-) create mode 100644 common/cmd_pxecfg.c create mode 100644 common/menu.c create mode 100644 doc/README.pxecfg create mode 100644 include/menu.h _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
