[PATCH v3 05/22] arm: mach-k3: common: Add CANUART wakeup check helpers

[Markus Schneider-Pargmann]

Add dedicated helper functions to check CANUART wake registers and magic
word. This helps determining if we are in a wakeup or if CAN IO
isolation has to be removed.

Also add a helper to detect a low power mode exit/resume.

Signed-off-by: Markus Schneider-Pargmann <m...@baylibre.com>
---
 arch/arm/mach-k3/common.c                | 22 ++++++++++++++++++++--
 arch/arm/mach-k3/common.h                |  1 +
 arch/arm/mach-k3/include/mach/hardware.h |  3 +++
 3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 
ff4f2150d318689a87909eb106b0b6fa8ff98f70..7c3f42e35b0f3a5aa7ed0bf01a1479b29d947540
 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -161,13 +161,31 @@ static void wkup_ctrl_remove_can_io_isolation(void)
        writel(0, WKUP_CTRL_MMR0_BASE + WKUP_CTRL_MMR_PMCTRL_IO_GLB);
 }
 
+static bool wkup_ctrl_canuart_wakeup_active(void)
+{
+       return !!(readl(WKUP_CTRL_MMR0_BASE + WKUP_CTRL_MMR_CANUART_WAKE_STAT1) 
&
+               WKUP_CTRL_MMR_CANUART_WAKE_STAT1_CANUART_IO_MODE);
+}
+
+static bool wkup_ctrl_canuart_magic_word_set(void)
+{
+       return readl(WKUP_CTRL_MMR0_BASE + 
WKUP_CTRL_MMR_CANUART_WAKE_OFF_MODE_STAT) ==
+               WKUP_CTRL_MMR_CANUART_WAKE_OFF_MODE_STAT_MW;
+}
+
 void wkup_ctrl_remove_can_io_isolation_if_set(void)
 {
-       if (readl(WKUP_CTRL_MMR0_BASE + WKUP_CTRL_MMR_CANUART_WAKE_STAT1) &
-           WKUP_CTRL_MMR_CANUART_WAKE_STAT1_CANUART_IO_MODE)
+       if (wkup_ctrl_canuart_wakeup_active() && 
!wkup_ctrl_canuart_magic_word_set())
                wkup_ctrl_remove_can_io_isolation();
 }
 
+bool wkup_ctrl_is_lpm_exit(void)
+{
+       return IS_ENABLED(CONFIG_K3_IODDR) &&
+               wkup_ctrl_canuart_wakeup_active() &&
+               wkup_ctrl_canuart_magic_word_set();
+}
+
 bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data)
 {
        if (strncmp(data->header, K3_ROM_BOOT_HEADER_MAGIC, 7))
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index 
49417679e2ec7210d5c95540f476a5d8ee548617..b7dd52fd1792cb6e3eab5c9f3863f983a8ac08df
 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -52,6 +52,7 @@ void do_board_detect(void);
 void ti_secure_image_check_binary(void **p_image, size_t *p_size);
 int shutdown_mcu_r5_core1(void);
 void wkup_ctrl_remove_can_io_isolation_if_set(void);
+bool wkup_ctrl_is_lpm_exit(void);
 
 #if (IS_ENABLED(CONFIG_K3_QOS))
 void setup_qos(void);
diff --git a/arch/arm/mach-k3/include/mach/hardware.h 
b/arch/arm/mach-k3/include/mach/hardware.h
index 
d7c759420524faf48ea26c66607c6a899d1321b3..e4e7dd61c0689db11083b81f2e74ba8bea74577e
 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -128,6 +128,9 @@ K3_SOC_ID(j722s, J722S)
 #define WKUP_CTRL_MMR_CANUART_WAKE_STAT1                       0x1830c
 #define WKUP_CTRL_MMR_CANUART_WAKE_STAT1_CANUART_IO_MODE       BIT(0)
 
+#define WKUP_CTRL_MMR_CANUART_WAKE_OFF_MODE_STAT               0x18318
+#define WKUP_CTRL_MMR_CANUART_WAKE_OFF_MODE_STAT_MW            0x555555
+
 #define WKUP_CTRL_MMR_PMCTRL_IO_0                              0x18084
 #define WKUP_CTRL_MMR_PMCTRL_IO_0_ISOCLK_OVRD_0                        BIT(0)
 #define WKUP_CTRL_MMR_PMCTRL_IO_0_ISOOVR_EXTEND_0              BIT(4)

-- 
2.49.0