On 5/12/25 18:44, Marek Vasut wrote:
> The DBGMCU block is available at address 0x50081000 both on STM32MP13xx
> and on STM32MP15xx . There is no reason to limit the DBGMCU macro being
> set only on STM32MP15xx , remove the ifdeffery.
>
> Signed-off-by: Marek Vasut <marek.va...@mailbox.org>
> ---
> Cc: Patrice Chotard <patrice.chot...@foss.st.com>
> Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
> Cc: Simon Glass <s...@chromium.org>
> Cc: Sughosh Ganu <sughosh.g...@linaro.org>
> Cc: Tom Rini <tr...@konsulko.com>
> Cc: u-boot@lists.denx.de
> Cc: uboot-st...@st-md-mailman.stormreply.com
> ---
> arch/arm/mach-stm32mp/include/mach/stm32.h | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h
> b/arch/arm/mach-stm32mp/include/mach/stm32.h
> index 47b459b75d1..dfba57e7dc4 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -78,9 +78,7 @@ enum forced_boot_mode {
> #define STM32_RCC_BASE 0x50000000
> #define STM32_PWR_BASE 0x50001000
> #define STM32_SYSCFG_BASE 0x50020000
> -#ifdef CONFIG_STM32MP15X
> #define STM32_DBGMCU_BASE 0x50081000
> -#endif
> #define STM32_FMC2_BASE 0x58002000
> #define STM32_IWDG2_BASE 0x5A002000
> #define STM32_DDRCTRL_BASE 0x5A003000
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Thanks
Patrice
