The DBGMCU block is available at address 0x50081000 both on STM32MP13xx
and on STM32MP15xx . There is no reason to limit the DBGMCU macro being
set only on STM32MP15xx , remove the ifdeffery.
Signed-off-by: Marek Vasut <marek.va...@mailbox.org>
---
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Sughosh Ganu <sughosh.g...@linaro.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-boot@lists.denx.de
Cc: uboot-st...@st-md-mailman.stormreply.com
---
arch/arm/mach-stm32mp/include/mach/stm32.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h
b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 47b459b75d1..dfba57e7dc4 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -78,9 +78,7 @@ enum forced_boot_mode {
#define STM32_RCC_BASE 0x50000000
#define STM32_PWR_BASE 0x50001000
#define STM32_SYSCFG_BASE 0x50020000
-#ifdef CONFIG_STM32MP15X
#define STM32_DBGMCU_BASE 0x50081000
-#endif
#define STM32_FMC2_BASE 0x58002000
#define STM32_IWDG2_BASE 0x5A002000
#define STM32_DDRCTRL_BASE 0x5A003000
--
2.47.2
