> -----Original Message----- > From: Longchamp, Valentin [mailto:valentin.longch...@keymile.com] > Sent: Sunday, June 12, 2011 5:39 PM > To: Prafulla Wadaskar; Brunck, Holger; u-boot@lists.denx.de > Cc: Heiko Schocher > Subject: RE: [PATCH v2 4/5] arm/km: replace suenx targets with > km_kirkwood > > Hi Prafulla, > > Sorry for the bad email formatting, using webmail from home. See my > answer below. > ...snip...
> Hi Holger, Valentin > > During this pull check I observed that u-boot.kwb image generation gives > build errors for all Kirkwood based keymile boards. > > Please kindly check on this and provide a fix. > > I had noticed about this u-boot.kwb image generation earlier, but we > don't use it internally yet. We would like to change this and use it > (and thus fix this error). > > Could you please answer my early question from this thread: > http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/99206 > > Here is my question again: > > Now I have a question about the marvell boards build: I see in the > Makefile that there is a rule about this kwb file, which is exactly what > we do in our additionnal build script: You don't need to add additional build script for this. Just make sure in your config you have configured CONFIG_SYS_KWD_CONFIG properly. It also have default configurations. > > $(obj)u-boot.kwb: $(obj)u-boot.bin > $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T > kwbimage \ > -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d > $< $ > > How do you use it (because I think it is not called by the default make > command) ? Make u-boot.kwb CROSS_COMPILE=..., with this u-boot.kwb (i.e. Kirkwood boot image) target will be generated. This is the standard way the other targets are build in u-boot. That's it. Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
