> -----Original Message----- > From: Prafulla Wadaskar > Sent: Saturday, June 11, 2011 9:53 AM > To: 'Holger Brunck'; u-boot@lists.denx.de > Cc: Valentin Longchamp; Heiko Schocher > Subject: RE: [PATCH v2 4/5] arm/km: replace suenx targets with > km_kirkwood > > > > > -----Original Message----- > > From: Holger Brunck [mailto:holger.bru...@keymile.com] > > Sent: Wednesday, June 08, 2011 5:13 PM > > To: u-boot@lists.denx.de > > Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Heiko > Schocher > > Subject: [PATCH v2 4/5] arm/km: replace suenx targets with km_kirkwood > > > > suen3 and suen8 were in first HW version quite different, but > > now they are from a u-boot point of view similar. So these > > two boards can use the same header file. Other keymile boards > > differ only in the usage of the PCI interface. Therefore > > a target km_kirkwood_pci was introduced. All targets use > > the same header file. > > > > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > > Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> > > cc: Prafulla Wadaskar <prafu...@marvell.com> > > cc: Heiko Schocher <h...@denx.de> > > --- > > Changes for v2: > > - squashed together with 5/6 from previous serie, because > > the pci defines belongs logically to this patch > > - change typo in board maintainers name > > > > MAINTAINERS | 6 ++- > > MAKEALL | 2 +- > > boards.cfg | 4 +- > > include/configs/km/km_arm.h | 1 - > > include/configs/{suen3.h => km_kirkwood.h} | 18 +++++++--- > > include/configs/mgcoge3un.h | 5 +++ > > include/configs/suen8.h | 50 ------------------- > -- > > ------- > > Applied to u-boot-marvell.git next branch > Regards.. > Prafulla . .
Hi Holger, Valentin During this pull check I observed that u-boot.kwb image generation gives build errors for all Kirkwood based keymile boards. Please kindly check on this and provide a fix. Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
