Hi Varadarajan,
On 5/7/25 13:28, Varadarajan Narayanan wrote:
Enable CONFIG_ENV_IS_IN_SCSI to store environment variables in SCSI.
Set env variables partition UUID as seen in qcs9100 based boards.
Signed-off-by: Varadarajan Narayanan <quic_var...@quicinc.com>
---
v3: s/CONFIG_SCSI_ENV_PART/CONFIG_SCSI_ENV_PART_UUID
---
configs/qcs9100_defconfig | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig
index 10ff4d25398..cd48973599b 100644
--- a/configs/qcs9100_defconfig
+++ b/configs/qcs9100_defconfig
@@ -14,5 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=14745600
# Address where U-Boot will be loaded
CONFIG_TEXT_BASE=0xaf000000
CONFIG_REMAKE_ELF=y
-
CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs9100-ride-r3"
+CONFIG_ENV_IS_IN_SCSI=y
+CONFIG_SCSI_ENV_PART_UUID="71cb9cd0-acf1-b6cb-ad91-be9572fe11a9"
Could you also update the RDP documentation to describe firstly that env
is loaded from a partition, and then reference this GUID and which
partition it is.
As Tom mentioned before, doing it on FAT would make it much easier to
tinker with, but I guess it's better to match what you're doing in
production, just as long as it's documented...
Kind regards,> +# CONFIG_ENV_IS_DEFAULT is not set
+# CONFIG_ENV_IS_NOWHERE is not set
--
Casey (she/they)
