Remove DS109 board reset_misc() function. U-Boot generic reset is enough.
Signed-off-by: Tony Dinh <mibo...@gmail.com>
---
board/Synology/ds109/ds109.c | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/board/Synology/ds109/ds109.c b/board/Synology/ds109/ds109.c
index 4f397578182..f3a914cc515 100644
--- a/board/Synology/ds109/ds109.c
+++ b/board/Synology/ds109/ds109.c
@@ -97,24 +97,6 @@ int board_init(void)
return 0;
}
-/* Synology reset uses UART */
-#include <ns16550.h>
-#define SOFTWARE_SHUTDOWN 0x31
-#define SOFTWARE_REBOOT 0x43
-#define CFG_SYS_NS16550_COM2 KW_UART1_BASE
-void reset_misc(void)
-{
- int b_d;
- printf("Synology reset...");
- udelay(50000);
-
- b_d = ns16550_calc_divisor((struct ns16550 *)CFG_SYS_NS16550_COM2,
- CFG_SYS_NS16550_CLK, 9600);
- ns16550_init((struct ns16550 *)CFG_SYS_NS16550_COM2, b_d);
- ns16550_putc((struct ns16550 *)CFG_SYS_NS16550_COM2,
- SOFTWARE_REBOOT);
-}
-
#ifdef CONFIG_RESET_PHY_R
/* Configure and enable MV88E1116 PHY */
void reset_phy(void)
--
2.39.5
