On Fri, 11 Apr 2025 14:47:37 +0200, Caleb Connolly wrote:
> Introduce a new event to signal that the live tree has been built,
> allowing boards to perform fixups on the tree before devices are bound.
> Crucially this allows for devices to be enabled or disabled, but also
> allows for properties that are parsed during the bind stage to be
> modified (such as dr_mode for dwc3).
>
> With this in place, mach-snapdragon is switched over to use the event
> and some hacky U-Boot specific DT overrides (which had to be undone
> prior to booting an image) are removed in favour of fixing up the
> livetree (which is not passed on to further boot stages).
>
> [...]
Applied to u-boot/master, thanks!
[1/8] event: signal when livetree has been built
commit: 993a9db918af451c68851522c8770e582b717629
[2/8] mach-snapdragon: use EVT_OF_LIVE_INIT to apply DT fixups
commit: 5a1dfb27f9170d35a475ea8be46b5d7c037ee837
[3/8] mach-snapdragon: of_fixup: skip disabled USB nodes
commit: 0ec337d03410a4a0b7402ae72968470cf63f0c55
[4/8] mach-snapdragon: of_fixup: remove confusing log message
commit: a6cc4ef343dc39c17fd5b833d983aff2f26c94b7
[5/8] mach-snapdragon: of_fixup: update comment
commit: 9bc7eef9bf58c4c1d453cba81060dc61375f5354
[6/8] mach-snapdragon: of_fixup: set dr_mode for RB1/2 boards
commit: 3b983cf48e70ecb6aadca788d0d91a021340c802
[7/8] clk/qcom: qcm2290: show clock name in set_rate()
commit: 229fd3f9a8d4dbaad7c9a2e9c1b62d14d0753b0b
[8/8] pinctrl: qcom: qcm2290: fix off by 1 in pin_count
commit: 2803a466a96153ab01c5789321e48397b6bae9c7
--
Tom
