Hi Simon, Am Fr., 25. Apr. 2025 um 16:36 Uhr schrieb Simon Glass <s...@chromium.org>:
> Hi Heiko, > > On Fri, 25 Apr 2025 at 02:20, Heiko Thiery <heiko.thi...@gmail.com> wrote: > > > > Hi Tom, > > > > Am Do., 24. Apr. 2025 um 19:49 Uhr schrieb Heiko Thiery > > <heiko.thi...@gmail.com>: > > > > > > Hi, > > > > > > Am Do., 24. Apr. 2025 um 19:45 Uhr schrieb Tom Rini < > tr...@konsulko.com>: > > > > > > > > On Thu, Apr 24, 2025 at 07:36:06PM +0200, Heiko Thiery wrote: > > > > > > > > > Hi, > > > > > > > > > > I tried bootflow for the first time and wanted to test my extlinux > > > > > configuration with separate menu entries. But I don't see that the > > > > > menu is shown. The default value is always selected. Am I right in > > > > > thinking that this is not supported with extlinux? > > > > > > > > I suspect Simon also found this recently and fixed it as part of > another > > > > series. It's likely in: > > > > > https://patchwork.ozlabs.org/project/uboot/list/?series=449177&state=* > > > > It wasn't based on master or next: > > > > > https://patchwork.ozlabs.org/project/uboot/cover/20250319143820.2385092-1-...@chromium.org/ > > > > And some of the tidying up lead to size growth in a number of > platforms: > > > > > https://patchwork.ozlabs.org/project/uboot/patch/20250319143820.2385092-2-...@chromium.org/ > > > > Along with needing to document some of the user visible changes: > > > > > https://patchwork.ozlabs.org/project/uboot/patch/20250319143820.2385092-7-...@chromium.org/ > > > > > > > > You might want to see if just patches 7 / 8 / 9 resolve the issue you > > > > see and if so we can get just those merged in. > > > > > > Sounds promising. I will try to test this in the next days (when I'm > > > back in office) and give you a feedback. > > > > Unfortunately it does not solve the problem. What I have is the > > following extlinux config file on my boot partition: > > > > >>>> extlinux.conf > > label Kontron SMARC-sAM67 > > kernel /Image > > devicetree /k3-am67a-kontron-sa67.dtb > > append root=PARTUUID=f615c46d-fe53-4547-8875-4c21438d931e rootwait > > > > label Kontron SMARC-sAM67 on Evaluation Carrier 2.0 > > kernel /Image > > devicetree /k3-am67a-kontron-sa67.dtb > > devicetree-overlay /k3-am67a-kontron-sa67-ads2.dtbo > > append root=PARTUUID=f615c46d-fe53-4547-8875-4c21438d931e rootwait > > >>>> > > > > >>>> output > > [SDHC] => bootflow scan > > Cannot persist EFI variables without system partition > > Bus usb@31000000: Register 1000840 NbrPorts 1 > > Starting the controller > > USB XHCI 1.10 > > Bus usb@31200000: cdns-usb3-host usb@31200000: set 1 has failed, back > to 0 > > scanning bus usb@31000000 for devices... 1 USB Device(s) found > > scanning bus usb@31200000 for devices... 1 USB Device(s) found > > > > Error: ethernet@8000000ethernet@800000 No valid MAC address found. > > > > Error: ethernet@8000000ethernet@800000 No valid MAC address found. > > [SDHC] => bootflow list > > Showing all bootflows > > Seq Method State Uclass Part Name > Filename > > --- ----------- ------ -------- ---- ------------------------ > > ---------------- > > 0 efi_mgr ready (none) 0 <NULL> > > 1 extlinux ready mmc 1 mmc@fa10000.bootdev.part_ > > /extlinux/extlinux.conf > > 2 extlinux ready mmc 1 mmc@fa00000.bootdev.part_ > > /extlinux/extlinux.conf > > --- ----------- ------ -------- ---- ------------------------ > > ---------------- > > (3 bootflows, 3 valid) > > [SDHC] => bootflow select 1 > > [SDHC] => bootflow info > > Name: mmc@fa10000.bootdev.part_1 > > Device: mmc@fa10000.bootdev > > Block dev: m...@fa10000.blk > > Method: extlinux > > State: ready > > Partition: 1 > > Subdir: (none) > > Filename: /extlinux/extlinux.conf > > Buffer: ffad2b80 > > Size: 17f (383 bytes) > > OS: Kontron SMARC-sAM67 on Evaluation Carrier 2.0 > > Cmdline: (none) > > Logo: (none) > > FDT: <NULL> > > Error: 0 > > [SDHC] => bootflow select 2 > > [SDHC] => bootflow info > > Name: mmc@fa00000.bootdev.part_1 > > Device: mmc@fa00000.bootdev > > Block dev: m...@fa00000.blk > > Method: extlinux > > State: ready > > Partition: 1 > > Subdir: (none) > > Filename: /extlinux/extlinux.conf > > Buffer: ffad3b80 > > Size: 17f (383 bytes) > > OS: Kontron SMARC-sAM67 on Evaluation Carrier 2.0 > > Cmdline: (none) > > Logo: (none) > > FDT: <NULL> > > Error: 0 > > [SDHC] => > > >>>> > > > > For both found extlinux based entries it shows in the OS info line > > "Kontron SMARC-sAM67 on Evaluation Carrier 2.0" that is the name/label > > of the seconds entry. But when booting either 1 or 2 it always loads > > the first entry of extlinux without loading and applying the overlay. > > > > Also support for having the menu shown is also not available. > > The behaviour you should see is that (after the bootflow menu) you > should see a separate 'extlinux' menu which allows you to choose the > correct entry. So you will need 'menu label' instead of label. > You are right. I added the missing keywords and now it works as expected. The menu appears. > > As Tom mentions my tree has some additional patches here: > > https://sjg.u-boot.org/u-boot/u-boot.git > > in case that helps. > > As to what you really want (putting each extlinux item in a separate > bootflow), that's the next step. I will get back to it, but most > likely not before the end of June. If you would like to try > implementing it yourself, let me know and I can send some pointers. > This is not what I expected to work. But it would also be good/nice to have. Unfortunately I cannot provide help here. > > Regards, > Simon >
