Hi Tom, Am Do., 24. Apr. 2025 um 19:49 Uhr schrieb Heiko Thiery <heiko.thi...@gmail.com>: > > Hi, > > Am Do., 24. Apr. 2025 um 19:45 Uhr schrieb Tom Rini <tr...@konsulko.com>: > > > > On Thu, Apr 24, 2025 at 07:36:06PM +0200, Heiko Thiery wrote: > > > > > Hi, > > > > > > I tried bootflow for the first time and wanted to test my extlinux > > > configuration with separate menu entries. But I don't see that the > > > menu is shown. The default value is always selected. Am I right in > > > thinking that this is not supported with extlinux? > > > > I suspect Simon also found this recently and fixed it as part of another > > series. It's likely in: > > https://patchwork.ozlabs.org/project/uboot/list/?series=449177&state=* > > It wasn't based on master or next: > > https://patchwork.ozlabs.org/project/uboot/cover/20250319143820.2385092-1-...@chromium.org/ > > And some of the tidying up lead to size growth in a number of platforms: > > https://patchwork.ozlabs.org/project/uboot/patch/20250319143820.2385092-2-...@chromium.org/ > > Along with needing to document some of the user visible changes: > > https://patchwork.ozlabs.org/project/uboot/patch/20250319143820.2385092-7-...@chromium.org/ > > > > You might want to see if just patches 7 / 8 / 9 resolve the issue you > > see and if so we can get just those merged in. > > Sounds promising. I will try to test this in the next days (when I'm > back in office) and give you a feedback.
Unfortunately it does not solve the problem. What I have is the following extlinux config file on my boot partition: >>>> extlinux.conf label Kontron SMARC-sAM67 kernel /Image devicetree /k3-am67a-kontron-sa67.dtb append root=PARTUUID=f615c46d-fe53-4547-8875-4c21438d931e rootwait label Kontron SMARC-sAM67 on Evaluation Carrier 2.0 kernel /Image devicetree /k3-am67a-kontron-sa67.dtb devicetree-overlay /k3-am67a-kontron-sa67-ads2.dtbo append root=PARTUUID=f615c46d-fe53-4547-8875-4c21438d931e rootwait >>>> >>>> output [SDHC] => bootflow scan Cannot persist EFI variables without system partition Bus usb@31000000: Register 1000840 NbrPorts 1 Starting the controller USB XHCI 1.10 Bus usb@31200000: cdns-usb3-host usb@31200000: set 1 has failed, back to 0 scanning bus usb@31000000 for devices... 1 USB Device(s) found scanning bus usb@31200000 for devices... 1 USB Device(s) found Error: ethernet@8000000ethernet@800000 No valid MAC address found. Error: ethernet@8000000ethernet@800000 No valid MAC address found. [SDHC] => bootflow list Showing all bootflows Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- 0 efi_mgr ready (none) 0 <NULL> 1 extlinux ready mmc 1 mmc@fa10000.bootdev.part_ /extlinux/extlinux.conf 2 extlinux ready mmc 1 mmc@fa00000.bootdev.part_ /extlinux/extlinux.conf --- ----------- ------ -------- ---- ------------------------ ---------------- (3 bootflows, 3 valid) [SDHC] => bootflow select 1 [SDHC] => bootflow info Name: mmc@fa10000.bootdev.part_1 Device: mmc@fa10000.bootdev Block dev: m...@fa10000.blk Method: extlinux State: ready Partition: 1 Subdir: (none) Filename: /extlinux/extlinux.conf Buffer: ffad2b80 Size: 17f (383 bytes) OS: Kontron SMARC-sAM67 on Evaluation Carrier 2.0 Cmdline: (none) Logo: (none) FDT: <NULL> Error: 0 [SDHC] => bootflow select 2 [SDHC] => bootflow info Name: mmc@fa00000.bootdev.part_1 Device: mmc@fa00000.bootdev Block dev: m...@fa00000.blk Method: extlinux State: ready Partition: 1 Subdir: (none) Filename: /extlinux/extlinux.conf Buffer: ffad3b80 Size: 17f (383 bytes) OS: Kontron SMARC-sAM67 on Evaluation Carrier 2.0 Cmdline: (none) Logo: (none) FDT: <NULL> Error: 0 [SDHC] => >>>> For both found extlinux based entries it shows in the OS info line "Kontron SMARC-sAM67 on Evaluation Carrier 2.0" that is the name/label of the seconds entry. But when booting either 1 or 2 it always loads the first entry of extlinux without loading and applying the overlay. Also support for having the menu shown is also not available. -- Heiko > Thanks in advance. > > BR > Heiko > > > -- > > Tom
