Dear Hong Xu, >> If there are SoC specific files to be adapted, they should be adapted >> as done in 9260. >> >> Board specific files should be looking like those of at91sam9260-ek. >> >> Remove fixed boards from the global Makefile and add them to boards.cfg. >> >> I'll put the fix for at91sam9260*-ek on u-boot-atmel/master in the next >> hours, >> you can have a look at it - or look at the patch I posted yesterday for it. > > OK, very nice. I'm just worried because I can not compile at91sam9260ek on > u-boot-atmel/master and u-boot-atmel/next 3 hrs ago. > > So, we're waiting for your work on sam9260 and take it as a starting point > for other boards.
Its now there. With toolchain ARM-4.5.2 the following warning is given (building top9000_eval_xe_config). I had no time to look into this. The warning is not due to rework and shows only with newer toolchains, I think. *** make u-boot.bin macb.c: In function ‘macb_write_hwaddr’: macb.c:525:2: warning: dereferencing type-punned pointer will break strict-aliasing rules at91sam9260-ek builds but throws a few more warnings in the dataflash_spi driver. Please also see my post titled "[U-Boot] ATMEL atmel_dataflash_spi.c - work at hand - can someone do it ?" Maybe you can look into that :) Best Regards, Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
