Hi Reinhard, On 06/07/2011 04:18 PM, Reinhard Meyer wrote: > Dear Xu, Hong, >> Dear Reinhard, >> >> We just noticed the warning from Wolfgang Denk about the status of the ARM >> boards. > > See http://article.gmane.org/gmane.comp.boot-loaders.u-boot/100918 >> >> There're quite a lot of AT91 boards listed. We're going to focus on > > fixing the current issues to let MAKEALL happy. :-) >> >> I know exactly your great work on AT91 and AVR32. The rework you're > > doing is quite excellent. We of course want to sync with what you have > > done. Could you please describe us the starting point we can begin with? > > Do you have special things which we can help? And so on ... >> >> Thanks a lot. > > If there are SoC specific files to be adapted, they should be adapted > as done in 9260. > > Board specific files should be looking like those of at91sam9260-ek. > > Remove fixed boards from the global Makefile and add them to boards.cfg. > > I'll put the fix for at91sam9260*-ek on u-boot-atmel/master in the next hours, > you can have a look at it - or look at the patch I posted yesterday for it.
OK, very nice. I'm just worried because I can not compile at91sam9260ek on u-boot-atmel/master and u-boot-atmel/next 3 hrs ago. So, we're waiting for your work on sam9260 and take it as a starting point for other boards. > Two notes: > 1. please limit line length in e-Mails to 80 or less - I had to manually > break your mail to be able to read it. > > 2. please post to the u-boot mailing list as well No problem. BR, Eric > Best Regards, > > Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
