Hi Jonas,
On Thu, Jan 23, 2025 at 09:48:48PM +0000, Jonas Karlman wrote:
>When MMC_SDHCI_SDMA=y or MMC_SDHCI_ADMA=y and PIO mode is used
>dma_unmap_single() is called on an unmapped address, 0x0. This may
>result in a Synchronous Abort:
>
> ## Checking hash(es) for Image atf-1 ... sha256+ OK
> CMD_SEND:16
> ARG 0x00000200
> MMC_RSP_R1,5,6,7 0x00000900
> CMD_SEND:18
> ARG 0x00004005
> "Synchronous Abort" handler, esr 0x96000147
> elr: 00000000400015bc lr : 0000000040012b4c
> x 0: 0000000000008000 x 1: 0000000000092600
> x 2: 0000000000000040 x 3: 000000000000003f
> x 4: 0000000000000030 x 5: 0000000000000001
> x 6: 0000000000000001 x 7: 0000000000000000
> x 8: 000000000000000a x 9: 0000000000000090
> x10: 0000000043dffc68 x11: 0000000043c00440
> x12: 0000000043c00440 x13: ffffffffbfe00000
> x14: 000000000000031c x15: 0000000240000000
> x16: 000000004001145c x17: 0000000000000032
> x18: 0000000043dffef0 x19: 0000000043c00000
> x20: 0000000043dffbc8 x21: 0000000000000000
> x22: 00000000000f3d95 x23: 0000000000000002
> x24: 0000000000000493 x25: 0000000000092600
> x26: 0000000000000001 x27: 0000000000000001
> x28: 0000000000000008 x29: 0000000043dffab0
>
> Code: d2800082 9ac32042 d1000443 8a230000 (d5087620)
> Resetting CPU ...
>
> resetting ...
>
>Fix this by only dma_unmap_single() when DMA mode is used and
>sdhci_prepare_dma() has been called to map host->start_addr.
>
>Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
>---
> drivers/mmc/sdhci.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
>index 4833b5158c79..dc7f0724a7b6 100644
>--- a/drivers/mmc/sdhci.c
>+++ b/drivers/mmc/sdhci.c
>@@ -177,8 +177,10 @@ static int sdhci_transfer_data(struct sdhci_host *host,
>struct mmc_data *data)
> } while (!(stat & SDHCI_INT_DATA_END));
>
> #if (CONFIG_IS_ENABLED(MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
>- dma_unmap_single(host->start_addr, data->blocks * data->blocksize,
>- mmc_get_dma_dir(data));
>+ if (host->flags & USE_DMA) {
>+ dma_unmap_single(host->start_addr, data->blocks *
>data->blocksize,
>+ mmc_get_dma_dir(data));
>+ }
Many platforms have MMC_SDHCI_SDMA enabled, but I not see USE_DMA is set.
So this change will make dma_unmap_single not being called for the platforms.
Will this introduce any issue?
Regards,
Peng
> #endif
>
> return 0;
>--
>2.48.1
>
