On 4/8/25 15:46, Sumit Garg wrote:
On Tue, Apr 08, 2025 at 02:17:29PM +0200, Caleb Connolly wrote:


On 4/7/25 15:28, Sumit Garg wrote:
From: Sumit Garg <sumit.g...@oss.qualcomm.com>

Add U-Boot override for RB1 to for USB in host mode as OTG mode isn't
supported. Also, disable sdhc_2 as it's currently not supported, sdhc_1
works fine though.

Signed-off-by: Sumit Garg <sumit.g...@oss.qualcomm.com>
---
   arch/arm/dts/qrb2210-rb1-u-boot.dtsi | 11 +++++++++++
   1 file changed, 11 insertions(+)
   create mode 100644 arch/arm/dts/qrb2210-rb1-u-boot.dtsi

diff --git a/arch/arm/dts/qrb2210-rb1-u-boot.dtsi 
b/arch/arm/dts/qrb2210-rb1-u-boot.dtsi
new file mode 100644
index 00000000000..1e136ee405a
--- /dev/null
+++ b/arch/arm/dts/qrb2210-rb1-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This is usually OTG but U-Boot doesn't support that properly */
+&usb_dwc3 {
+       dr_mode = "host";
+};
+
+/* SDHC_2 isn't supported in U-Boot as of now */

I'd rather avoid disabling this here, I guess it's just missing clocks and
regulators which doesn't justify modifying DT. An error that mmc1 couldn't
be enabled seems fine to me?

I totally echo with your thinking that we should avoid modifying DT but
at the same point we shouldn't enable peripherals in U-Boot which throws
errors. It's also possible that U-Boot misconfiguring mmc1 which might

I disagree, DT isn't enabling or disabling peripherals, it's describing hardware. U-Boot lacking proper support for that hardware isn't a good justification to disable it. Especially since you might boot Linux with the same DT and now have no working sdcard for seemingly no reason.

An error in U-Boot is exactly the behaviour we want to see, masking it only created confusion.> turn as a problem for later stages.

I have been totally working with a remote lab to fix issues on RB1. I
will soon get one on my desk then I will be able to fix mmc1 too.

In that case we can surely land the proper fixes for 2025.07 anyway, so I'd just keep the errors until then.

Kind regards,>
-Sumit

+&sdhc_2 {
+       status = "disabled";
+};
--
Caleb (they/them)


--
Caleb (they/them)

Reply via email to