On 4/7/25 15:28, Sumit Garg wrote:
From: Sumit Garg <sumit.g...@oss.qualcomm.com>
Add U-Boot override for RB1 to for USB in host mode as OTG mode isn't
supported. Also, disable sdhc_2 as it's currently not supported, sdhc_1
works fine though.
Signed-off-by: Sumit Garg <sumit.g...@oss.qualcomm.com>
---
arch/arm/dts/qrb2210-rb1-u-boot.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 arch/arm/dts/qrb2210-rb1-u-boot.dtsi
diff --git a/arch/arm/dts/qrb2210-rb1-u-boot.dtsi
b/arch/arm/dts/qrb2210-rb1-u-boot.dtsi
new file mode 100644
index 00000000000..1e136ee405a
--- /dev/null
+++ b/arch/arm/dts/qrb2210-rb1-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This is usually OTG but U-Boot doesn't support that properly */
+&usb_dwc3 {
+ dr_mode = "host";
+};
+
+/* SDHC_2 isn't supported in U-Boot as of now */
I'd rather avoid disabling this here, I guess it's just missing clocks
and regulators which doesn't justify modifying DT. An error that mmc1
couldn't be enabled seems fine to me?> +&sdhc_2 {
+ status = "disabled";
+};
--
Caleb (they/them)
