[PATCH 07/13] board: dragonboard410c: Use dynamically allocated load addresses

[Stephan Gerhold]

The generic Qualcomm board code allocates addresses for loading the kernel,
ramdisk, DT, fastboot etc. This also happens on the DB410c and already
overrides these definitions defined in the default env. So let's just drop
the static ones, since the dynamic ones work just fine.

Signed-off-by: Stephan Gerhold <stephan.gerh...@linaro.org>
---
 board/qualcomm/dragonboard410c/dragonboard410c.c   | 2 +-
 board/qualcomm/dragonboard410c/dragonboard410c.env | 8 +-------
 2 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.c 
b/board/qualcomm/dragonboard410c/dragonboard410c.c
index 
61d68e7f0c6bed16861e6ceaefd2c7dc94807d65..697e3c9b08b5c874912eb66ff4f0b3d32deaae01
 100644
--- a/board/qualcomm/dragonboard410c/dragonboard410c.c
+++ b/board/qualcomm/dragonboard410c/dragonboard410c.c
@@ -66,7 +66,7 @@ int misc_init_r(void)
 
        state = button_get_state(btn);
        if (state == BUTTON_ON) {
-               env_set("preboot", "setenv preboot; fastboot 0");
+               env_set("preboot", "setenv preboot; run fastboot");
                printf("vol_down pressed - Starting fastboot.\n");
        }
 
diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.env 
b/board/qualcomm/dragonboard410c/dragonboard410c.env
index 
eb42c0abcf11fedf7ab86d1340531b4ff5b52bf5..0032dc3592a1021e4bb422357867cc26b4b30551
 100644
--- a/board/qualcomm/dragonboard410c/dragonboard410c.env
+++ b/board/qualcomm/dragonboard410c/dragonboard410c.env
@@ -1,9 +1,3 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
-loadaddr=0x81000000
 initrd_high=0xffffffffffffffff
-kernel_addr_r=0x81000000
-fdtfile=qcom/apq8016-sbc.dtb
-fdt_addr_r=0x83000000
-ramdisk_addr_r=0x84000000
-scriptaddr=0x90000000
-pxefile_addr_r=0x90100000
+fastboot=fastboot -l $fastboot_addr_r usb 0

-- 
2.47.2