[PATCH 01/11] rockchip: rk3588: Use hptimer reg names in rockchip_stimer_init

[Jonas Karlman]

Define constants for hptimer reg names and use them instead of magic
numbers in rockchip_stimer_init().

Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
 arch/arm/mach-rockchip/rk3588/rk3588.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c 
b/arch/arm/mach-rockchip/rk3588/rk3588.c
index 6395483f14f1..ac35866e2f87 100644
--- a/arch/arm/mach-rockchip/rk3588/rk3588.c
+++ b/arch/arm/mach-rockchip/rk3588/rk3588.c
@@ -116,18 +116,25 @@ void board_debug_uart_init(void)
 }
 
 #ifdef CONFIG_XPL_BUILD
+
+#define HP_TIMER_BASE                  CONFIG_ROCKCHIP_STIMER_BASE
+#define HP_CTRL_REG                    0x04
+#define TIMER_EN                       BIT(0)
+#define HP_LOAD_COUNT0_REG             0x14
+#define HP_LOAD_COUNT1_REG             0x18
+
 void rockchip_stimer_init(void)
 {
        /* If Timer already enabled, don't re-init it */
-       u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + 0x4);
+       u32 reg = readl(HP_TIMER_BASE + HP_CTRL_REG);
 
-       if (reg & 0x1)
+       if (reg & TIMER_EN)
                return;
 
-       asm volatile("msr CNTFRQ_EL0, %0" : : "r" (CONFIG_COUNTER_FREQUENCY));
-       writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 0x14);
-       writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 0x18);
-       writel(0x1, CONFIG_ROCKCHIP_STIMER_BASE + 0x4);
+       asm volatile("msr cntfrq_el0, %0" : : "r" (CONFIG_COUNTER_FREQUENCY));
+       writel(0xffffffff, HP_TIMER_BASE + HP_LOAD_COUNT0_REG);
+       writel(0xffffffff, HP_TIMER_BASE + HP_LOAD_COUNT1_REG);
+       writel(TIMER_EN, HP_TIMER_BASE + HP_CTRL_REG);
 }
 #endif
 
-- 
2.49.0