Hi Andre: On 13:32 Sat 05 Apr , Andre Przywara wrote: > On Sat, 5 Apr 2025 02:44:33 +0000 > Yixun Lan <d...@gentoo.org> wrote: > > Hi, > > > On 11:35 Sun 23 Mar , Andre Przywara wrote: > > > This series introduces support for the Allwinner A523 SoC family. The > > > same die is used in different packages: the A523, A527, T527, and H728: > > > they connect a different set of peripherals to the pins, or enable extra > > > goodies like an NPU. From a U-Boot perspective those chips do not differ > > > much, all the differences are described in the board DT files. > > > These patches are not the most refined at the moment, but I hope that > > > people start reviewing them, so we can merge the ones that are ready, > > > to reduce their number. ... > > is ATF loading address correct, 0x54000 here? which seems override sp > > address? > > Yes, that's the correct address. Which SP would it collide with, anyway? > > So in summary you did everything right, and the SPL is returning to FEL > with DRAM initialised, which is the biggest hurdle. > Just use the correct A523 TF-A branch and build target. > right, with correct ATF, I'm able to boot into uboot console also, emmc works on radxa a5e board (same change with avaota-a1)..
thanks -- Yixun Lan (dlan) Gentoo Linux Developer GPG Key ID AABEFD55
