From: Fabio Estevam <feste...@denx.de>
Currently, there are always some spurious characters showing up
right before SPL banner is shown:
RomBOOT
���=������
U-Boot SPL 2025.04-rc5-00023-g9ed4e2c45f25 (Apr 03 2025 - 23:23:17 -0300)
Trying to boot from MMC1
<debug_uart>
...
Fix this problem by removing the redundant UART iomux and clock
initialization from the board code, as they are handled by DM code.
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c
b/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c
index 04de1257eca0..a0ecc4f42a90 100644
--- a/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c
+++ b/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c
@@ -41,17 +41,8 @@ int board_late_init(void)
#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
-static void board_uart0_hw_init(void)
-{
- atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, ATMEL_PIO_PUEN_MASK);
/* URXD0 */
- atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0);
/* UTXD0 */
-
- at91_periph_clk_enable(ATMEL_ID_UART0);
-}
-
void board_debug_uart_init(void)
{
- board_uart0_hw_init();
}
#endif
--
2.34.1
