Hi Simon, On 2025-03-28 16:35, Simon Glass wrote: > There doesn't seem to be a good reason to use a different value for TPL > than SPL.
This reference to SPL stack addr is still a little bit confusing, all RK3399 boards now use a SPL stack addr in DRAM and not i SRAM. So SPL and TPL stack addr will continue to use a different addr after this patch. Regards, Jonas > Change the TPL value, since it allows a 256-byte bloblist to > be safely located above the stack in all phases. > > Note that for most boards, SDRAM init happens in TPL so the SPL stack > ends up in DRAM, at address CONFIG_SPL_STACK_R_ADDR. > > Signed-off-by: Simon Glass <s...@chromium.org> > --- > > (no changes since v2) > > Changes in v2: > - Reword commit to mention comments from Jonas > > arch/arm/mach-rockchip/rk3399/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig > b/arch/arm/mach-rockchip/rk3399/Kconfig > index fc55b498111..8064b6286fc 100644 > --- a/arch/arm/mach-rockchip/rk3399/Kconfig > +++ b/arch/arm/mach-rockchip/rk3399/Kconfig > @@ -159,7 +159,7 @@ config TPL_LDSCRIPT > default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" > > config TPL_STACK > - default 0xff8effff > + default 0xff8eff00 > > config TPL_TEXT_BASE > default 0xff8c2000
