On Wed, Mar 26, 2025 at 06:40:37PM +0100, Caleb Connolly wrote: >We can now correctly identify which partition U-Boot is flashed to >between uefi, xbl, and boot (including A/B support) so enable capsule >update support for all boards. > >Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org> >--- > configs/qcm6490_defconfig | 6 ------ > configs/qcom_defconfig | 3 +++ > 2 files changed, 3 insertions(+), 6 deletions(-) > >diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig >index >ba26924da161b1c4b5378955185f314b05cb1006..5ddc5ab3ef8cfe8f9cc09eb573c1a8130b394b43 > 100644 >--- a/configs/qcm6490_defconfig >+++ b/configs/qcm6490_defconfig >@@ -18,10 +18,4 @@ CONFIG_DEBUG_UART_CLOCK=14745600 > CONFIG_TEXT_BASE=0x9fc00000 > CONFIG_REMAKE_ELF=y > > CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" >- >-# Enable capsule updates >-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y >-CONFIG_EFI_CAPSULE_ON_DISK=y >-CONFIG_EFI_IGNORE_OSINDICATIONS=y >-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y >diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig >index >ba4d38d100e053e3708ee2623bf3530787b6b94f..d69185f3c2f0452e6757b785a023cf612bfa3839 > 100644 >--- a/configs/qcom_defconfig >+++ b/configs/qcom_defconfig >@@ -5,8 +5,11 @@ CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864 > CONFIG_ARCH_SNAPDRAGON=y > CONFIG_NR_DRAM_BANKS=24 > CONFIG_DEFAULT_DEVICE_TREE="qcom/sdm845-db845c" > CONFIG_SYS_LOAD_ADDR=0xA0000000 >+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y >+CONFIG_EFI_CAPSULE_ON_DISK=y >+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y > CONFIG_BUTTON_CMD=y > CONFIG_FIT=y > CONFIG_FIT_VERBOSE=y > CONFIG_BOOTSTD_FULL=y
For capsule update, CONFIG_EFI_MM_COMM_TEE is not needed? Regards, Peng > >-- >2.49.0 >
