Add tests for the exfat filesystem. These tests are largely an
extension of the FS_GENERIC tests with the following notable
exceptions.
The filesystem image for exfat tests is generated using combination
of exfatutils mkfs.exfat and python fattools. The fattols are capable
of generating exfat filesystem images too, but this is not used, the
fattools are only used as a replacement for dosfstools 'mcopy' and
'mdir', which are used to insert files and directories into existing
fatfs images and list existing fatfs images respectively, without the
need for superuser access to mount such images.
The exfat filesystem has no filesystem specific command, there is only
the generic filesystem command interface, therefore check_ubconfig()
has to special case exfat and skip check for CONFIG_CMD_EXFAT and
instead check for CONFIG_FS_EXFAT.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Baruch Siach <bar...@tkos.co.il>
Cc: Francesco Dolcini <francesco.dolc...@toradex.com>
Cc: Heinrich Schuchardt <xypron.g...@gmx.de>
Cc: Hiago De Franco <hiago.fra...@toradex.com>
Cc: Ilias Apalodimas <ilias.apalodi...@linaro.org>
Cc: Nam Cao <nam...@linutronix.de>
Cc: Simon Glass <s...@chromium.org>
Cc: Sughosh Ganu <sughosh.g...@linaro.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-boot@lists.denx.de
---
test/py/requirements.txt | 1 +
test/py/tests/fs_helper.py | 8 ++++++--
test/py/tests/test_fs/conftest.py | 20 +++++++++++---------
test/py/tests/test_fs/test_ext.py | 20 ++++++++++++++------
4 files changed, 32 insertions(+), 17 deletions(-)
diff --git a/test/py/requirements.txt b/test/py/requirements.txt
index c726135b4df..dd9cf7640a5 100644
--- a/test/py/requirements.txt
+++ b/test/py/requirements.txt
@@ -3,3 +3,4 @@ pycryptodomex==3.21.0
pytest==6.2.5
pytest-xdist==2.5.0
setuptools==75.8.0
+FATtools==1.0.42
diff --git a/test/py/tests/fs_helper.py b/test/py/tests/fs_helper.py
index 378d5ae0690..94a5b94f479 100644
--- a/test/py/tests/fs_helper.py
+++ b/test/py/tests/fs_helper.py
@@ -35,7 +35,9 @@ def mk_fs(config, fs_type, size, prefix, src_dir=None,
size_gran = 0x100000):
else:
mkfs_opt = ''
- if re.match('fat', fs_type) or fs_type == 'fs_generic':
+ if fs_type == 'exfat':
+ fs_lnxtype = 'exfat'
+ elif re.match('fat', fs_type) or fs_type == 'fs_generic':
fs_lnxtype = 'vfat'
else:
fs_lnxtype = fs_type
@@ -43,7 +45,7 @@ def mk_fs(config, fs_type, size, prefix, src_dir=None,
size_gran = 0x100000):
if src_dir:
if fs_lnxtype == 'ext4':
mkfs_opt = mkfs_opt + ' -d ' + src_dir
- elif fs_lnxtype != 'vfat':
+ elif fs_lnxtype != 'vfat' and fs_lnxtype != 'exfat':
raise ValueError(f'src_dir not implemented for fs {fs_lnxtype}')
count = (size + size_gran - 1) // size_gran
@@ -64,6 +66,8 @@ def mk_fs(config, fs_type, size, prefix, src_dir=None,
size_gran = 0x100000):
check_call(f'tune2fs -O ^metadata_csum {fs_img}', shell=True)
elif fs_lnxtype == 'vfat' and src_dir:
check_call(f'mcopy -i {fs_img} -vsmpQ {src_dir}/* ::/', shell=True)
+ elif fs_lnxtype == 'exfat' and src_dir:
+ check_call(f'fattools cp {src_dir}/* {fs_img}', shell=True)
return fs_img
except CalledProcessError:
call(f'rm -f {fs_img}', shell=True)
diff --git a/test/py/tests/test_fs/conftest.py
b/test/py/tests/test_fs/conftest.py
index 8d5654fdb67..9b05bd94008 100644
--- a/test/py/tests/test_fs/conftest.py
+++ b/test/py/tests/test_fs/conftest.py
@@ -12,11 +12,11 @@ import u_boot_utils as util
# pylint: disable=E0611
from tests import fs_helper
-supported_fs_basic = ['fat16', 'fat32', 'ext4', 'fs_generic']
-supported_fs_ext = ['fat12', 'fat16', 'fat32', 'fs_generic']
+supported_fs_basic = ['fat16', 'fat32', 'exfat', 'ext4', 'fs_generic']
+supported_fs_ext = ['fat12', 'fat16', 'fat32', 'exfat', 'fs_generic']
supported_fs_fat = ['fat12', 'fat16']
-supported_fs_mkdir = ['fat12', 'fat16', 'fat32', 'fs_generic']
-supported_fs_unlink = ['fat12', 'fat16', 'fat32', 'fs_generic']
+supported_fs_mkdir = ['fat12', 'fat16', 'fat32', 'exfat', 'fs_generic']
+supported_fs_unlink = ['fat12', 'fat16', 'fat32', 'exfat', 'fs_generic']
supported_fs_symlink = ['ext4']
#
@@ -112,7 +112,7 @@ def fstype_to_prefix(fs_type):
Return:
A corresponding command prefix for file system type.
"""
- if fs_type == 'fs_generic':
+ if fs_type == 'fs_generic' or fs_type == 'exfat':
return ''
elif re.match('fat', fs_type):
return 'fat'
@@ -150,9 +150,11 @@ def check_ubconfig(config, fs_type):
Return:
Nothing.
"""
- if not config.buildconfig.get('config_cmd_%s' % fs_type, None):
+ if fs_type == 'exfat' and not config.buildconfig.get('config_fs_%s' %
fs_type, None):
+ pytest.skip('.config feature "FS_%s" not enabled' % fs_type.upper())
+ if fs_type != 'exfat' and not config.buildconfig.get('config_cmd_%s' %
fs_type, None):
pytest.skip('.config feature "CMD_%s" not enabled' % fs_type.upper())
- if fs_type == 'fs_generic':
+ if fs_type == 'fs_generic' or fs_type == 'exfat':
return
if not config.buildconfig.get('config_%s_write' % fs_type, None):
pytest.skip('.config feature "%s_WRITE" not enabled'
@@ -192,7 +194,7 @@ def fs_obj_basic(request, u_boot_config):
"""
fs_type = request.param
fs_cmd_prefix = fstype_to_prefix(fs_type)
- fs_cmd_write = 'save' if fs_type == 'fs_generic' else 'write'
+ fs_cmd_write = 'save' if fs_type == 'fs_generic' or fs_type == 'exfat'
else 'write'
fs_img = ''
fs_ubtype = fstype_to_ubname(fs_type)
@@ -304,7 +306,7 @@ def fs_obj_ext(request, u_boot_config):
"""
fs_type = request.param
fs_cmd_prefix = fstype_to_prefix(fs_type)
- fs_cmd_write = 'save' if fs_type == 'fs_generic' else 'write'
+ fs_cmd_write = 'save' if fs_type == 'fs_generic' or fs_type == 'exfat'
else 'write'
fs_img = ''
fs_ubtype = fstype_to_ubname(fs_type)
diff --git a/test/py/tests/test_fs/test_ext.py
b/test/py/tests/test_fs/test_ext.py
index 4e79135f824..47228be83c5 100644
--- a/test/py/tests/test_fs/test_ext.py
+++ b/test/py/tests/test_fs/test_ext.py
@@ -345,11 +345,19 @@ class TestFsExt(object):
'%s%s host 0:0 %x /%s 0'
% (fs_cmd_prefix, fs_cmd_write, ADDR, MANGLE_FILE)])
assert('0 bytes written' in ''.join(output))
- # Test Case 12b - Read file system content
- output = check_output('mdir -i %s' % fs_img, shell=True).decode()
- # Test Case 12c - Check if short filename is not mangled
- assert(str2fat(PLAIN_FILE) in ''.join(output))
- # Test Case 12d - Check if long filename is mangled
- assert(str2fat(MANGLE_FILE) in ''.join(output))
+ if fs_type == 'exfat':
+ # Test Case 12b - Read file system content
+ output = check_output('fattools ls %s' % fs_img,
shell=True).decode()
+ # Test Case 12c - Check if short filename is not mangled
+ assert(PLAIN_FILE in ''.join(output))
+ # Test Case 12d - Check if long filename is mangled
+ assert(MANGLE_FILE in ''.join(output))
+ else:
+ # Test Case 12b - Read file system content
+ output = check_output('mdir -i %s' % fs_img,
shell=True).decode()
+ # Test Case 12c - Check if short filename is not mangled
+ assert(str2fat(PLAIN_FILE) in ''.join(output))
+ # Test Case 12d - Check if long filename is mangled
+ assert(str2fat(MANGLE_FILE) in ''.join(output))
assert_fs_integrity(fs_type, fs_img)
--
2.47.2
