From: Stefan Eichenberger <stefan.eichenber...@toradex.com>
The commit bc07851897bd ("board: ti: Pull redundant DDR functions to a
common location and Fixup DDR size when ECC is enabled") broke DRAM
support for the Verdin AM62. This was partially fixed with commit
3f866c47b582 ("board: verdin-am62: add dram_init_banksize"). However,
because fixup_memory_node was not called, the Linux kernel was started
with the wrong memory size on modules with less memory available. This
resulted in boot failures. Fix this issue by calling fixup_memory_node
in the board file.
spl_perform_fixups will be called in the SPL and now sets the correct
memory size in the device tree of U-Boot by calling fixup_memory_node.
U-Boot will then adjust the memory sizes of Linux during bootm/booti in
fdt_fixup_memory_banks. This chain ensures that U-Boot and Linux only
use RAM that is actually available.
Fixes: 3f866c47b582 ("board: verdin-am62: add dram_init_banksize")
Fixes: bc07851897bd ("board: ti: Pull redundant DDR functions to a common
location and Fixup DDR size when ECC is enabled")
Signed-off-by: Stefan Eichenberger <stefan.eichenber...@toradex.com>
---
board/toradex/verdin-am62/verdin-am62.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/board/toradex/verdin-am62/verdin-am62.c
b/board/toradex/verdin-am62/verdin-am62.c
index b80b39b6767..a1c471111a0 100644
--- a/board/toradex/verdin-am62/verdin-am62.c
+++ b/board/toradex/verdin-am62/verdin-am62.c
@@ -15,6 +15,7 @@
#include <init.h>
#include <k3-ddrss.h>
#include <spl.h>
+#include <asm/arch/k3-ddr.h>
#include "../common/tdx-cfg-block.h"
@@ -43,6 +44,9 @@ int dram_init_banksize(void)
if (ret)
printf("Error setting up memory banksize. %d\n", ret);
+ /* Use the detected RAM size, we only support 1 bank right now. */
+ gd->bd->bi_dram[0].size = gd->ram_size;
+
return ret;
}
@@ -108,6 +112,13 @@ int board_late_init(void)
#define CORE_VOLTAGE 0x80000000
#define MCU_CTRL_LFXOSC_32K_BYPASS_VAL BIT(4)
+#if IS_ENABLED(CONFIG_XPL_BUILD)
+void spl_perform_fixups(struct spl_image_info *spl_image)
+{
+ fixup_memory_node(spl_image);
+}
+#endif
+
#ifdef CONFIG_SPL_BOARD_INIT
void spl_board_init(void)
{
--
2.45.2
