Siddharth Vadapalli <s-vadapa...@ti.com> writes: > Introduce the config fragment for enabling USB MSC boot. USB MSC boot > involves fetching the next stage of the bootloader from a USB Mass Storage > device such as a USB Flash Drive with the USB controller on the SoC acting > as the USB Host. > > Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> > --- > configs/am62x_r5_usbmsc.config | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 configs/am62x_r5_usbmsc.config > > diff --git a/configs/am62x_r5_usbmsc.config b/configs/am62x_r5_usbmsc.config > new file mode 100644 > index 0000000000..2ce6afb662 > --- /dev/null > +++ b/configs/am62x_r5_usbmsc.config > @@ -0,0 +1,22 @@ > +CONFIG_USB=y > +CONFIG_SPL_USB_HOST=y > +CONFIG_SPL_SYSCON=y > +CONFIG_SPL_MISC=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_GADGET=y > +CONFIG_SPL_USB_GADGET=y > +CONFIG_USB_DWC3=y > +CONFIG_SPL_USB_DWC3_GENERIC=y > +CONFIG_SPL_USB_DWC3_AM62=y > +CONFIG_SPL_USB_STORAGE=y
Hi Siddharth, You either need to set CONFIG_USB_STORAGE as well in am62x_r5_usbmsc.config, or otherwise modify usb.h to include the declaration of usb_stor_info(). Eg use: #if defined CONFIG_SPL_USB_STORAGE || defined CONFIG_USB_STORAGE instead of #ifdef CONFIG_USB_STORAGE See the build log: spl_usb.c:41:29: error: implicit declaration of function usb_stor_scan thanks Jon > +# CONFIG_SPL_MMC is not set > +# CONFIG_SPL_LIBDISK_SUPPORT is not set > +# CONFIG_SPL_MTD is not set > +# CONFIG_SPL_SPI is not set > +# CONFIG_SPL_SYS_MALLOC is not set > +# CONFIG_CMD_GPT is not set > +# CONFIG_CMD_MMC is not set > +# CONFIG_CMD_FAT is not set > +# CONFIG_MMC_SDHCI is not set > +# CONFIG_CMD_DFU is not set > +# CONFIG_DFU is not set > -- > 2.34.1
