On Wed, Feb 26, 2025 at 11:27 PM Tom Rini <tr...@konsulko.com> wrote:
> Did you reset the environment at some point to be the new default?
Yes, this was the issue, thanks.
Besides that, I also need to set kernel_addr_r for the boot to succeed:
--- a/board/freescale/imx93_evk/imx93_evk.env
+++ b/board/freescale/imx93_evk/imx93_evk.env
@@ -16,6 +16,7 @@ mmcroot=/dev/mmcblk1p2 rootwait rw
mmcautodetect=yes
mmcargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console}
root=${mmcroot}
prepare_mcore=setenv mcore_clk clk-imx93.mcore_booted
+kernel_addr_r=CONFIG_SYS_LOAD_ADDR
loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}
Tomorrow, I will send a formal patch that sets kernel_addr_r for all
the i.MX EVK boards that have been converted to bootstd.
Thanks for your help
