Add configs to enable Ethernet boot in R5SPL, also disable not required configs to avoid memory limitation.
Signed-off-by: Chintan Vankar <c-van...@ti.com> --- This patch is newly introduced in this series. configs/j722s_evm_r5_ethboot_defconfig | 30 ++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 configs/j722s_evm_r5_ethboot_defconfig diff --git a/configs/j722s_evm_r5_ethboot_defconfig b/configs/j722s_evm_r5_ethboot_defconfig new file mode 100644 index 00000000000..fd58485bff2 --- /dev/null +++ b/configs/j722s_evm_r5_ethboot_defconfig @@ -0,0 +1,30 @@ +#include<configs/j722s_evm_r5_defconfig> + +CONFIG_ARM=y +CONFIG_ARCH_K3=y +CONFIG_SOC_K3_J722S=y +CONFIG_TARGET_J722S_R5_EVM=y +CONFIG_DEFAULT_DEVICE_TREE="k3-j722s-r5-evm" +CONFIG_NET=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000 +CONFIG_SPL_DMA=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_ETH=y +CONFIG_SPL_I2C=y +CONFIG_SPL_NET=y +CONFIG_SPL_NET_VCI_STRING="J722S U-Boot R5 SPL" +CONFIG_TI_K3_NAVSS_UDMA=y +CONFIG_TI_AM65_CPSW_NUSS=y +CONFIG_SPL_MMC=n +CONFIG_SPL_SPI=n +CONFIG_SPL_MTD_LOAD=n +CONFIG_SPL_NAND_SPI_SUPPORT=n +CONFIG_SPL_DM_DEVICE_REMOVE=n +CONFIG_DM_MTD=n +CONFIG_MTD_SPI_NAND=n +CONFIG_DM_SPI_FLASH=n +CONFIG_SPI=n +CONFIG_DM_SPI=n +CONFIG_CADENCE_QSPI=n -- 2.34.1
