-----Original Message-----
From: alif.zakuan.yusla...@intel.com <alif.zakuan.yusla...@intel.com>
Sent: Tuesday, February 18, 2025 4:35 PM
To: u-boot@lists.denx.de
Cc: Marek Vasut <ma...@denx.de>; Simon Goldschmidt
<simon.k.r.goldschm...@gmail.com>; Chee, Tien Fong <tien.fong.c...@altera.com>;
Yuslaimi, Alif Zakuan <alif.zakuan.yusla...@altera.com>; Meng, Tingting
<tingting.m...@altera.com>; Ng, Boon Khai <boon.khai...@altera.com>; Hea, Kok
Kiang <kok.kiang....@altera.com>; Alif Zakuan Yuslaimi
<alif.zakuan.yusla...@intel.com>
Subject: [PATCH v2 25/26] configs: socfpga: soc64: agilex5: Enable QSPI boot
with UBI / UBIFS
From: Alif Zakuan Yuslaimi <alif.zakuan.yusla...@intel.com>
Add the required configuration in the U-Boot env to enable Linux QSPI boot with
UBI / UBIFS.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yusla...@altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.c...@altera.com>
---
configs/socfpga_agilex5_defconfig | 1 +
include/configs/socfpga_soc64_common.h | 6 ++++++
2 files changed, 7 insertions(+)
diff --git a/configs/socfpga_agilex5_defconfig
b/configs/socfpga_agilex5_defconfig
index 2b71ccac025..5b3e8125aa2 100644
--- a/configs/socfpga_agilex5_defconfig
+++ b/configs/socfpga_agilex5_defconfig
@@ -37,6 +37,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x500000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_CACHE=y
CONFIG_SPL_SPI_FLASH_MTD=y
+CONFIG_SPL_MTD=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x04000000
CONFIG_SPL_ATF=y
diff --git a/include/configs/socfpga_soc64_common.h
b/include/configs/socfpga_soc64_common.h
index b7ee1dbf201..5ed17671f79 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 2017-2024 Intel Corporation <www.intel.com>
+ * Copyright (C) 2025 Altera Corporation <www.altera.com>
*
*/
@@ -56,6 +57,11 @@
#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
"bootcmd_qspi=ubi detach; sf probe && " \
+ "setenv mtdids 'nor0=nor0,nand0=nand.0' && " \
+ "setenv mtdparts 'mtdparts=nor0:66m(u-boot),190m(root); " \
+ "nand.0:2m(nand_uboot),500m(nand_root)' && " \
+ "env select UBI; saveenv && " \
+ "ubi part root && " \
"if ubi part root && ubi readvol ${scriptaddr} script; " \
"then echo QSPI: Running script from UBIFS; " \
"elif sf read ${scriptaddr} ${qspiscriptaddr} ${scriptsize}; " \
--
2.25.1
Reviewed-by: Tien Fong Chee <tien.fong.c...@altera.com>
Best regards,
Tien Fong
