Hi Simon,
On Thu, 6 Feb 2025 at 10:41, Simon Glass <s...@chromium.org> wrote:
>
> Hi Raymond,
>
> On Wed, 5 Feb 2025 at 08:25, Raymond Mao <raymond....@linaro.org> wrote:
> >
> > +CC Ilias,
> >
> > Hi Simon,
> >
> > On Tue, 4 Feb 2025 at 20:57, Simon Glass <s...@chromium.org> wrote:
> > >
> > > The logic of this has become too confusing.
> > >
> > > The primary issue with the patch is that U-Boot needs to set up a
> > > bloblist in the first phase where BLOBLIST is enabled. Subsequent
> > > phases can then use that bloblist.
> > >
> > > But the first phase of U-Boot cannot assume that one exists.
> > >
> > > Reverting this commit seems like a better starting point for getting
> > > things working for all use-cases.
> > >
> > > This reverts commit 66131310d8ff1ba228f989b41bd8812f43be41c3.
> > >
> > > https://lore.kernel.org/u-boot/CAPnjgZ3hMHtiH=f5zkxnniofv_-vfryq1gn7qz5hku8wjo8...@mail.gmail.com/
> > > Signed-off-by: Simon Glass <s...@chromium.org>
> > > ---
> > >
> >
> > If my understanding is correct, you want to add some logic to control
> > when the U-Boot should or should not get the bloblist from the
> > existing register argument.
> > But xferlist_from_boot_arg() should be called when a valid register
> > argument is there, I didn't see this in your patch.
> > Maybe you plan to do this with other patch series, but simply
> > reverting this results in a breaking of handoff policy and the
> > firmware handoff won't work.
>
> Yes, I certainly did not want to revert it, but the current code is
> too hard to understand and I did not look at it at the time it went
> in. I've had three tries at working with what you have here, but each
> turns to spaghetti.
>
Still not very clear on what concerns you have and what is the way you
want to go.
The logic is straight forward, when U-Boot has a previous loader and
the registers pass in valid arguments - It indicates handoff should be
done using the transfer list.
Other kconfig options decide whether to use the passed in address
directly or copy to a predefined address.
But in either way, xferlist_from_boot_arg() is doing the right thing
to get the transfer list from the register if it exists and is valid.
I don't see a reason for removing it.
Regards,
Raymond
> I would like to build on this and get something running in CI which
> uses standard passage. As Tom suggests, perhaps we should disconnect
> bloblist and standard passage?
>
> On the CI point, is there a board we could add that uses the
> xferlist_from_boot_arg() call?
>
> Regards,
> Simon
>
> >
> > Regards,
> > Raymond
> >
> > > common/bloblist.c | 64 ++++++++++++++--------------------------------
> > > include/bloblist.h | 10 --------
> > > 2 files changed, 19 insertions(+), 55 deletions(-)
> > >
> > > diff --git a/common/bloblist.c b/common/bloblist.c
> > > index e8acfc74331..7eda94ecdf9 100644
> > > --- a/common/bloblist.c
> > > +++ b/common/bloblist.c
> > > @@ -487,57 +487,37 @@ int bloblist_reloc(void *to, uint to_size)
> > > return 0;
> > > }
> > >
> > > -/*
> > > - * Weak default function for getting bloblist from boot args.
> > > - */
> > > -int __weak xferlist_from_boot_arg(ulong __always_unused addr,
> > > - ulong __always_unused size)
> > > -{
> > > - return -ENOENT;
> > > -}
> > > -
> > > int bloblist_init(void)
> > > {
> > > bool fixed = IS_ENABLED(CONFIG_BLOBLIST_FIXED);
> > > int ret = -ENOENT;
> > > - ulong addr = 0, size;
> > > - /*
> > > - * If U-Boot is not in the first phase, an existing bloblist must
> > > be
> > > - * at a fixed address.
> > > - */
> > > - bool from_addr = fixed && !xpl_is_first_phase();
> > > - /*
> > > - * If U-Boot is in the first phase that an arch custom routine
> > > should
> > > - * install the bloblist passed from previous loader to this fixed
> > > + ulong addr, size;
> > > + bool expected;
> > > +
> > > + /**
> > > + * We don't expect to find an existing bloblist in the first
> > > phase of
> > > + * U-Boot that runs. Also we have no way to receive the address
> > > of an
> > > + * allocated bloblist from a previous stage, so it must be at a
> > > fixed
> > > * address.
> > > */
> > > - bool from_boot_arg = fixed && xpl_is_first_phase();
> > > -
> > > + expected = fixed && !xpl_is_first_phase();
> > > if (xpl_prev_phase() == PHASE_TPL &&
> > > !IS_ENABLED(CONFIG_TPL_BLOBLIST))
> > > - from_addr = false;
> > > + expected = false;
> > > if (fixed)
> > > addr = IF_ENABLED_INT(CONFIG_BLOBLIST_FIXED,
> > > CONFIG_BLOBLIST_ADDR);
> > > size = CONFIG_BLOBLIST_SIZE;
> > > -
> > > - if (from_boot_arg)
> > > - ret = xferlist_from_boot_arg(addr, size);
> > > - else if (from_addr)
> > > + if (expected) {
> > > ret = bloblist_check(addr, size);
> > > -
> > > - if (ret)
> > > - log_warning("Bloblist at %lx not found (err=%d)\n",
> > > - addr, ret);
> > > - else
> > > - /* Get the real size */
> > > - size = gd->bloblist->total_size;
> > > -
> > > + if (ret) {
> > > + log_warning("Expected bloblist at %lx not found
> > > (err=%d)\n",
> > > + addr, ret);
> > > + } else {
> > > + /* Get the real size, if it is not what we
> > > expected */
> > > + size = gd->bloblist->total_size;
> > > + }
> > > + }
> > > if (ret) {
> > > - /*
> > > - * If we don't have a bloblist from a fixed address, or
> > > the one
> > > - * in the fixed address is not valid. we must allocate the
> > > - * memory for it now.
> > > - */
> > > if (CONFIG_IS_ENABLED(BLOBLIST_ALLOC)) {
> > > void *ptr = memalign(BLOBLIST_ALIGN, size);
> > >
> > > @@ -545,8 +525,7 @@ int bloblist_init(void)
> > > return log_msg_ret("alloc", -ENOMEM);
> > > addr = map_to_sysmem(ptr);
> > > } else if (!fixed) {
> > > - return log_msg_ret("BLOBLIST_FIXED is not
> > > enabled",
> > > - ret);
> > > + return log_msg_ret("!fixed", ret);
> > > }
> > > log_debug("Creating new bloblist size %lx at %lx\n", size,
> > > addr);
> > > @@ -559,11 +538,6 @@ int bloblist_init(void)
> > > return log_msg_ret("ini", ret);
> > > gd->flags |= GD_FLG_BLOBLIST_READY;
> > >
> > > -#ifdef DEBUG
> > > - bloblist_show_stats();
> > > - bloblist_show_list();
> > > -#endif
> > > -
> > > return 0;
> > > }
> > >
> > > diff --git a/include/bloblist.h b/include/bloblist.h
> > > index 1e1ca34aa92..5063ab66e4a 100644
> > > --- a/include/bloblist.h
> > > +++ b/include/bloblist.h
> > > @@ -482,14 +482,4 @@ static inline int bloblist_maybe_init(void)
> > > */
> > > int bloblist_check_reg_conv(ulong rfdt, ulong rzero, ulong rsig);
> > >
> > > -/**
> > > - * xferlist_from_boot_arg() - Get bloblist from the boot args and
> > > relocate it
> > > - * to the specified address.
> > > - *
> > > - * @addr: Address for the bloblist
> > > - * @size: Size of space reserved for the bloblist
> > > - * Return: 0 if OK, else on error
> > > - */
> > > -int xferlist_from_boot_arg(ulong addr, ulong size);
> > > -
> > > #endif /* __BLOBLIST_H */
> > > --
> > > 2.43.0
> > >
